GB/T 31132-2014Intrusion alarm systems -- Technical requirements for interconnection of equipment using radio frequency (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard uses the redrafted law revision adopted IEC 62642-5-3:2010 "anti-robbery alarm system and intrusion systems - Part 5-3.

Wireless (RF) devices connected technical requirements "(in English).

This standard and IEC 62642-5-3:2010 technical differences and the reasons are as follows.

--- To make the standard more clearly the scope of IEC 62642-5-3:2010 Chapter 1 has been modified;

--- Taking into account the current situation of the wireless alarm products, the RF link monitoring requirements, and interference detection antenna required safety class 1 reduced requirements;

--- Increased 4.1 Chapter 4 "frequency requirements";

--- 4.4.1 adds "device identification code number," 4.5.1 "General immunity test requirements" and 4.6.1 "radio frequency link to detect common begging";

--- Increased in Chapter 5, 5.1.2 "test frequency requirements";

--- Increased Chapter 6, "Inspection Rules";

--- Added Appendix A "security level." this standard by the National Security Alarm System Standardization Technical Committee (SAC/TC100) and focal points.

Drafting of this standard. National Security Alarm System Product Quality Supervision and Inspection Center (Shanghai), Guangdong home Digital Technology Co., Ltd., Quanzhou Fergus Technology Electronics Co., Honeywell Security (China) Co., Ltd., Luoyang CMG Electronics Co., Secretary, National Security Alarm System Product Quality Supervision and Inspection Center (Beijing).

1 Scope

This standard specifies the wireless intrusion alarm in the field of terminology, definitions, technical requirements, test methods and inspection rules.

This standard applies to the use of wireless (RF) technology to transmit an alarm signal interconnect intrusion alarm device within the protected area.

This standard does not apply to long-distance transmission of wireless intrusion alarm equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

IEC 62642-1 intrusion alarm systems and anti-robbery systems - Part 1. System requirements (Alarmsystems-Intrusionand hold-upsystems-Part 1. Systemrequirements)

3 Terms and definitions, abbreviations