GB/T 31071-2014General science and technology infrastructure—Principles and methods for conformance testing (English PDF)
科技平台 一致性测试的原则与方法
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31071-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 22, 2014
Implementation date
June 1, 2015
Scope
GB/T 31071-2014 is the English-translated version of 科技平台 一致性测试的原则与方法.
GB/T 31071-2014 is the Chinese standard "General science and technology infrastructure -- Principles and methods for conformance testing". Its scope clause reads: This Standard specifies the basic principles, methods and process.
This Standard applies to conformance testing BETWEEN science and technology resources, general science and technology infrastructure standards AND relevant standards.
Its clauses include terms and abbreviations; basic principles of conformance testing; conformance testing methods; conformance testing process. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on DECEMBER 22, 2014 and took effect on JUNE 01, 2015.
Found what you need?
Document preview — GB/T 31071-2014
National Standard of the People's Republic of China
- ICS
- 35.240.30
- Classification
- L 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- Introduction4
- 1 Scope5
- 2 Normative references5
- 3 Terms and Abbreviations5
- 4 Basic Principles of Conformance Testing8
- 5 Conformance Testing Methods9
- 6 Conformance Testing Process11
- Annex A (Informative) An Example of the Questionnaire of Implementation Conformance Statement13
- Annex B (Informative) An Example of the Abstract Test Suite of GB/T 30523-2014 "Science and Technology Infrastructure - Resource Core Metadata"15
- Annex C (Informative) Framework of Conformance Testing Report19
- Bibliography21
Foreword
This Standard is drafted in accordance with the rules specified in GB/T 1.1-2009.
Introduction
Science and technology resources have characteristics of wide variety and great quantity.
With the help of conformance testing method, science and technology resources, criteria and relevant standards can maintain conformance to avoid unnecessary overlapping, repetition and even contradiction. This Standard produces the criteria to be fulfilled when statements are in conformance to relevant standards. Conformance testing on science and technology resources and standards can accelerate integration and sharing of science and technology resources.
1 Scope
This Standard specifies the basic principles, methods and process.
This Standard applies to conformance testing BETWEEN science and technology resources, general science and technology infrastructure standards AND relevant standards.
2 Normative references
The following documents are indispensable for application of this document. For the dated documents so quoted, only the dated versions apply to this document. For the undated documents so quoted, the latest versions (including all modification sheets) apply to this document.
GB/T 19333.5-2003 Geographic information - Conformance and testing
3 Terms and Abbreviations
The terms and definitions defined in GB/T 19333.5-2003 and mentioned below apply to this document. For ease of use, some terms and definitions in GB/T 19333.5-2003 are repeated here.
3.1.1 Science and Technology (S&T) Resources
The generic term of human, material and financial resources for science and technology [Translator note. hereafter abbreviated as S&T] activities as well as elements such as organization, management and information. [GB/T 31075-2014, Definitions 2.2.1]
3.1.2 General Science and Technology (S&T) Infrastructure Standard
A normative document that is agreed to be established and approved by competent standardization organization concerned for joint use or reuse to obtain the best order in the sphere related to the general S&T infrastructure. [GB/T 31075-2014, Definitions 2.1.5]
3.1.3 Conformance
Requirements that meet what is specified. [GB/T 19333.5-2003, Definitions 3.8]
3.1.4 Conformance Assessment Process
The process of conducting a conformance assessment that is realized by a standard. [GB/T 19333.5-2003, Definitions 3.9]
3.1.5 Conformance Clause
Clauses that specify necessary requirements for meeting this Standard. [GB/T 19333.5-2003, Definitions 3.10]
3.1.6 Conformance Testing
Test that is done on S&T resources and general S&T infrastructure standards, so as to confirm the level of implementation of conformance BETWEEN S&T resources, general S&T infrastructure standards AND relevant standards.
3.1.7 Conformance Test Report
A summary in conformity with this Standard and all the test details that support the general summary. [GB/T 19333.5-2003, Definitions 3.12]
3.1.8 Abstract Test Case
General tests for specific requirements.
Note: The abstract test case is a formal foundation from which executable test cases are derived. An abstract test case may include one or more test purposes. One abstract test case does not depend on implementation, nor on values. It shall be complete enough to definitely distribute the test determination to every patient observable test result (e.g. test event sequence). [GB/T 19333.5-2003, Definitions 3.1]
3.1.9 Abstract Test Suite
The abstract test module - it provides all the requirements that need to be met to achieve conformance. [GB/T 19333.5-2003, Definitions 3.4]
3.1.10 Basic Test
The initial capability test - its purpose is to determine those obvious nonconformance. [GB/T 19333.5-2003, Definitions 3.6]
3.1.11 Capability Test
A test that is designed to determine whether an implementation under test (IUT) is in line with the specific characteristics of a standard described in the test purposes. [GB/T 19333.5-2003, Definitions 3.7]
3.1.12 Executable Test Suite
If the basic test fails to fulfil requirements, a testing laboratory can carry out capability tests.
Capability tests shall have the ability to test observable IUT; the ability shall be consistent with what the ICS claims. Within the full scope of the conformance requirements as set forth by corresponding standards, capability tests shall be as compressive as possible. The abstract capability test in ATS is a standardized test.
Basic tests, either abstract or executable in form, shall give as detailed tests to the implementation within the full scope of the conformance requirements specified by a standard as possible. Capability tests shall be carried out when mandatory capability and the IUT-supported optional capability determined in ICS are tested.
Capability tests are served to test whether IUT capability fulfils the conformance requirements, and give causes of failure.
5 Conformance Testing Methods
5.4 Test Methods
5.4.1 Classified According to Test Purpose
5.4.1.1 Verification Test
The verification test is the test and assessment carried out to determine whether S&T resources and S&T infrastructure standards meet the specified testing requirements. Even using strict methods of correctness proof, the test shall be able to make clear-cut and exhaustive verification for an implementation.
A verification test ensures that a specific test suite can cover all the connotations of a standard. For technical and economic reasons, however, most standards often make it impractical to carry out verification tests due to their scale and complexity.
5.4.1.2 Falsification Test
A falsification test is a method of developing specific test sets or suites for an implementation according to a standard to test errors in the implementation.
The falsification test is simple and easy for operation. However, falsification tests cannot ensure that a specific test suite can cover all the connotations of a standard, because an implementation failed in specific tests or specific test sets can be pronounced not up to a standard. However, even an implementation leads to correct results in a complete test suite, it is still not completely convinced that the implementation is up to a reference standard.
5.4.2 Classified According to Automation Level
5.4.2.1 Automatic Test
Automatic tests can make use of software to carry out the required tests. It can be used for both of verification tests and falsification tests.
Example: Whether the metadata format of the S&T resources of every S&T infrastructure conforms to S&T Infrastructure-Resource Core Metadata.
Considering that there may have many test methods, the test method used shall be reported.
Annex B (Informative) An Example of the Abstract Test Suite of GB/T 30523-2014 "Science and Technology Infrastructure - Resource Core Metadata"
B.1 Abstract Test Suite of Identifiers
B.1.1 Test Case Identifier. Test of Uniqueness
The content of the test case is as follows.
a) Test purpose. ensure the uniqueness of every metadata identifier, which is favorable to the integration and sharing of S&T resources. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 31071-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19333.5-2003 — Geographic information -- Conformance and testing
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 31071-2014
$105.00