GB/T 31061-2014Cork-rubber gasket for shield-driven tunnel (English PDF)
盾构法隧道管片用软木橡胶衬垫
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31061-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 22, 2014
Implementation date
June 1, 2015
Scope
GB/T 31061-2014 is the English-translated version of 盾构法隧道管片用软木橡胶衬垫.
GB/T 31061-2014 is the Chinese standard "Cork-rubber gasket for shield-driven tunnel". Its scope clause reads: This standard specifies the shield tunnel segments terms and definitions cork rubber gasket, classification and marking requirements, test methods, inspection regulations And the signs, packaging, transportation and storage.
This standard applies to rubber and cork powder as the main raw material, shield tunnel segment after molding made of vulcanized seams with soft load transfer Wooden rubber gasket (hereinafter referred to as cork pad). Its clauses include terms and definitions; classification and marking.
Found what you need?
Document preview — GB/T 31061-2014
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Classification
- G 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification and Marking
1 Scope
This standard specifies the shield tunnel segments terms and definitions cork rubber gasket, classification and marking requirements, test methods, inspection regulations
And the signs, packaging, transportation and storage.
This standard applies to rubber and cork powder as the main raw material, shield tunnel segment after molding made of vulcanized seams with soft load transfer
Wooden rubber gasket (hereinafter referred to as cork pad).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 528-2009 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness)
GB/T 2941 rubber physical test method for preparing and conditioning General Procedure
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Compression recoverability compressionrecoveryatcertaindeformation under constant strain
After deformation under fixed conditions, and the adjusted compressed, to restore its ability to shape the sample, the sample with a test temperature of pre-release
Percentage ratio of the height of the original sample height measurements represent a given time.
3.2 Compressive deformation under constant stress
Deformation conditions at a fixed applied stress deforms in the direction of the force, and the force applied perpendicular to their values in the direction of the applied test
Like cross-sectional area than the original representation.
4 Classification and Marking
4.1 Classification
Cork pads its use position into the following three categories.
a) longitudinal seam cork pad with ZF represented;
b) girth cork pad with HF represents;
c) Deformation cork pad with BXF expressed.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31061-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31061-2014
$145.00