GB/T 30961-2014Embedded software quality metric (English PDF)
嵌入式软件质量度量
This is a limited preview
Buy now to download the full PDF (76 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30961-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 8, 2014
Implementation date
December 1, 2014
Scope
GB/T 30961-2014 is the English-translated version of 嵌入式软件质量度量.
GB/T 30961-2014 is the Chinese standard "Embedded software quality metric". Its scope clause reads: This standard specifies the internal quality model embedded software, external quality and quality in use model model, and the model of each special Sex, child characteristics and measuring element has been specifically described.
With these characteristics, sub-characteristics and measuring element may be the quality of embedded software Definition and evaluation.
This standard applies to the following users. a) the demand side. the demand side is to obtain or purchase embedded systems, embedded software or individual or organization and services from suppliers. b) evaluators. evaluator is embedded software implementation evaluation activities of individuals or organizations. c) Developer.
Developer is the implementation of development activities of individuals or organizations. Embedded software development activities including survival needs during Analysis, design, coding, testing, and acceptance. d) Defenders.
Defenders is to perform maintenance activities of individuals or organizations. e) Supplier. the supplier is based on a contract to provide embedded systems, individuals or organizations embedded software or services to the acquirer. f) User.
The user is using an embedded software to perform specific tasks in the individual or organization. Individual managers are responsible for the quality of embedded systems, embedded software or service quality will be checked. g) quality control manager Or organization. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30961-2014
National Standard of the People's Republic of China
- ICS
- 35.080
- Classification
- L 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 quality and life cycle
- 6 Quality Model
- 6.1 Internal and External Quality Model Quality Model
- 6.1.1 Overview
- 6.1.2 Functional
- 6.1.3 Reliability
- 6.1.4 ease of
- 6.1.5 Efficiency
- 6.1.6 Serviceability
- 6.1.7 Portability
- 6.2 Quality Model
- 6.2.1 Overview
- 6.2.2 Effectiveness
- 6.2.3 Productivity
- 6.2.4 Security
- 6.2.5 Satisfaction of
- 7 yuan measuring table Note
- 8.1 functional measurement unit
- 8.1.1 suitability measuring unit
- 8.1.2 Accuracy of measurement unit
- 8.1.3 Interoperability measuring unit
- 8.1.4 security and confidentiality of the measuring unit
- 8.1.5 Compliance measurement unit
- 8.2 Reliability measurement unit
- 8.2.1 maturity measurement unit
- 8.2.2 fault tolerance measuring unit
- 8.2.3 Recoverability of measuring element
- 8.2.4 Compliance measurement unit
- 8.3 Usability measurement unit
- 8.3.1 easy to understand measurement unit
- 8.3.2 learnability measurement unit
- 8.3.3 ease of measurement unit
- 8.3.4 attractivity measurement unit
- 8.3.5 Compliance Measurement Element
- 8.4 Efficiency measurement unit
- 8.4.1 timing measurement unit
- 8.4.2 Resource Utilization of measuring element
- 8.4.3 Compliance measurement unit
- 8.4.4 maintainability measurement unit
- 8.4.5 Easy analytical measurement unit
- 8.4.6 Changeability measurement unit
- 8.4.7 Stability measuring unit
- 8.4.9 Compliance measurement unit
- 8.5 Portability measuring element
- 8.5.1 Adaptability measuring element
- 8.5.2 Coexistence measurement unit
- 8.5.3 Easy replacement of the measuring element
- 8.5.4 Compliance Measurement Element
- 9.1 functional measurement unit
- 9.1.1 suitability measuring unit
- 9.1.2 Accuracy of measurement unit
- 9.1.3 Interoperability of measuring element
- 9.1.4 security and confidentiality of the measuring unit
- 9.1.5 Compliance Measurement Element
- 9.2 Reliability measurement unit
- 9.2.1 maturity measurement unit
- 9.2.2 fault tolerance measuring unit
- 9.2.3 Recoverability of measuring element
- 9.2.4 Compliance measurement unit
- 9.3 ease of measuring element
- 9.3.1 easy to understand measurement unit
- 9.3.2 learn of measuring element
- 9.3.3 ease of measuring element
- 9.3.4 Attraction of measuring element
- 9.3.5 Compliance Measurement Element
- 9.4 Efficiency measurement unit
- 9.4.1 timing measurement unit
- 9.4.2 Resource Utilization of measuring element
- 9.4.3 Compliance Measurement Element
- 9.5 maintainability measuring element
- 9.5.1 Easy analytical measuring element
- 9.5.2 Changeability measurement unit
- 9.5.3 Stability measuring unit
- 9.5.4 testability measurement element
- 9.5.5 Compliance Measurement Element
- 9.6 Portability measuring element
- 9.6.1 Adaptability measuring element
- 9.6.2 Coexistence of measuring element
- 9.6.3 Easy replacement of the measuring element
1 Scope
This standard specifies the internal quality model embedded software, external quality and quality in use model model, and the model of each special
Sex, child characteristics and measuring element has been specifically described. With these characteristics, sub-characteristics and measuring element may be the quality of embedded software
Definition and evaluation.
This standard applies to the following users.
a) the demand side. the demand side is to obtain or purchase embedded systems, embedded software or individual or organization and services from suppliers.
b) evaluators. evaluator is embedded software implementation evaluation activities of individuals or organizations.
c) Developer. Developer is the implementation of development activities of individuals or organizations. Embedded software development activities including survival needs during
Analysis, design, coding, testing, and acceptance.
d) Defenders. Defenders is to perform maintenance activities of individuals or organizations.
e) Supplier. the supplier is based on a contract to provide embedded systems, individuals or organizations embedded software or services to the acquirer.
f) User. The user is using an embedded software to perform specific tasks in the individual or organization.
Individual managers are responsible for the quality of embedded systems, embedded software or service quality will be checked. g) quality control manager
Or organization.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11457-2006 Information technology - Software engineering terminology
GB/T 18905.1-2002 Software engineering - Product evaluation - Part 1. General (idt ISO /IEC 14598-1.1999)
GB/T 16260.1-2006 Software engineering - Product quality - Part 1. Quality model (ISO /IEC 9126-1.2001, IDT)
GB/T 16260.2-2006 Software engineering - Product quality - Part 2. External metrics (ISO /IEC TR9126-2.2003,
IDT)
GB/T 16260.3-2006 Software engineering - Product quality - Part 3. Internal metrics (ISO /IEC TR9126-3.2003,
IDT)
GB/T 16260.4-2006 Software engineering - Product quality - Part 4. Measurement quality in use (ISO /IEC TR9126-4.
2004, IDT)
3 Terms and Definitions
GB/T 11457-1995, GB/T 18905.1-2002, GB/T 16260.1-2006 and GB/T 16260.4-2006 defined
The following terms and definitions apply to this document.
3.1 Embedded Systems
Placed inside of an object from the application of information processing and control action dedicated computer system.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 76 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30961-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30961-2014
$1,280.00