Valid

GB/T 30906-2014Determination of sodium tripolyphosphate content of sodium tripolyphosphate—Ion chromatography (English PDF)

三聚磷酸钠中三聚磷酸钠含量的测定 离子色谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30906-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 8, 2014

Implementation date

December 1, 2014

Scope

GB/T 30906-2014 is the English-translated version of 三聚磷酸钠中三聚磷酸钠含量的测定 离子色谱法.

GB/T 30906-2014 gives an ion chromatography method for determining the sodium tripolyphosphate content of sodium tripolyphosphate.

Clause 1 states that the standard specifies the terms and definitions, the principle of the method, the reagents, the apparatus and the measurement, and that it applies to the determination of the sodium tripolyphosphate content in sodium tripolyphosphate by ion chromatography.

Clause 3 defines seven terms of the technique, beginning with ion chromatography itself, described as a branch of high performance liquid chromatography in which the ionic components are separated by ion exchange and then measured with a suitable detector.

It then defines the guard column, placed ahead of the separation column to protect it against particulate matter and irreversibly retained impurities; the separation column, which separates the ions to be detected according to their retention characteristics; and the analytical column, the one or more separation columns connected after the guard column, to whose total capacity all the columns of the system contribute.

The same clause defines the suppressor, a device fitted between the analytical column and the detector that reduces the detector response to the eluent and increases it for the ions being detected, so improving the signal to noise ratio; the eluent, the flowing ionic phase that carries the sample through the analytical column; and resolution, the ability of a separation column to analyse successive components under given test conditions.

Clause 2 cites GB/T 6682-2008. It was proposed by the China Petroleum and Chemical Industry Association and is administered by SAC/TC63/SC1. The draft breaks off at the end of clause 3, so the principle, the reagents, the apparatus and the measurement procedure are not shown. It was issued on 8 July 2014 and has applied since 1 December 2014.

Found what you need?

Document preview — GB/T 30906-2014

National Standard of the People's Republic of China

ICS
71.060.01
Classification
G 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the determination of terms and definitions in sodium tripolyphosphate sodium tripolyphosphate content by ion chromatography method principle, reagents, apparatus, It is measured.

This standard applies to the determination of sodium tripolyphosphate sodium tripolyphosphate content in ion chromatography.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

Laboratory use specifications and test methods GB/T 6682-2008 Analysis

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Ion Chromatography

By ion exchange separation of ionic components, and then use the appropriate detector, it is a branch of high-performance liquid chromatography.

3.2 Guard column

Before separation column placed to protect the separation column against particulate matter or irreversible contamination of impurities such reservations.

3.3 Separation column

According to the detected ion retention characteristics, it will be detected prior to detection of the ion exchange column separation.

3.4 Analytical column

After the guard column is connected in one or more separation columns for separating the composition of a series of test ion analysis system. All the pillars of the system The total capacity of the column analytical column with the contribution.

3.5 Suppressor

Installed between the analytical column and a detector for detecting the response lotion reduce leaching of ionic components, in response to detection of an increase of the detected ion, A special device thus improving the signal to noise ratio.

3.6 Eluent

Phase flow of ions, the sample carrier through the analytical column.

3.7 Resolution

Under certain test conditions, a separate column continuous component analysis capability.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 30906-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30906-2014

$85.00