GB/T 30905-2014Inorganic chemicals for industrial use—Determination of element contents—X-ray fluorescence analysis (English PDF)
无机化工产品 元素含量的测定 X射线荧光光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30905-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 8, 2014
Implementation date
December 1, 2014
Scope
GB/T 30905-2014 is the English-translated version of 无机化工产品 元素含量的测定 X射线荧光光谱法.
GB/T 30905-2014 is the Chinese standard "Inorganic chemicals for industrial use—Determination of element contents—X-ray fluorescence analysis".
Its scope clause reads: This standard specifies the terms and definitions of the elements in inorganic chemical products Determination of X-ray fluorescence spectrometry, the principle of the method, chromatic Dispersive X-ray fluorescence spectrometer composition, preparation of samples, quantitative analysis, precision and safety laboratory.
This standard applies to wavelength dispersive X-ray fluorescence spectrometry determination of inorganic chemical products in element content. Can be analyzed from Be to U Between elements, analysis of elements content range from 0.0001% to 100%. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30905-2014
National Standard of the People's Republic of China
- ICS
- 71.060.01
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Wavelength dispersion
- 3.2 X-ray fluorescence fluorescentX-ray
- 3.3 Monitoring sample specimenforcalibrationofinstrument
- 3.4 Standard sample specimenforcalibrationcurve
- 3.5 Background
1 Scope
This standard specifies the terms and definitions of the elements in inorganic chemical products Determination of X-ray fluorescence spectrometry, the principle of the method, chromatic
Dispersive X-ray fluorescence spectrometer composition, preparation of samples, quantitative analysis, precision and safety laboratory.
This standard applies to wavelength dispersive X-ray fluorescence spectrometry determination of inorganic chemical products in element content. Can be analyzed from Be to U
Between elements, analysis of elements content range from 0.0001% to 100%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat
Of the basic methods of reproduction
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Wavelength dispersion
X-ray diffraction occurs by splitting space dispersion, said dispersion of crystals, also called wavelength dispersion.
3.2 X-ray fluorescence fluorescentX-ray
Atomic energy is higher than the inner electron binding energy of high-energy X-rays collide with atoms, atomic inner electron expelled and the emergence of a
Hole, so that the whole system is in an unstable atomic excited states, when compared with the outer electron transition to the inner hole, the energy release is not an atom
Absorbed but discharged in the form of radiation, it will produce X-ray fluorescence.
3.3 Monitoring sample specimenforcalibrationofinstrument
Instrument for correcting X-ray intensity drift samples, requiring elemental analysis line has adequate strength and long-term stability.
3.4 Standard sample specimenforcalibrationcurve
A sample of known composition and content of work for drawing curves, the sample should be in the chemical composition, physical properties and other aspects of a
Cause. The concentration of the standard sample should cover the concentration range of Quantitative Analysis.
3.5 Background
Line superimposed on a continuous spectrum analysis, mainly from the scattering of the radiation incident on the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30905-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30905-2014
$145.00