Valid

GB/T 30827-2014Technical conditions for external prestressing tendons (English PDF)

体外预应力索技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30827-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 6, 2014

Implementation date

April 1, 2015

Scope

GB/T 30827-2014 is the English-translated version of 体外预应力索技术条件.

GB/T 30827-2014 is the Chinese standard "Technical conditions for external prestressing tendons".

Its scope clause reads: This standard specifies the terms and definitions, symbols and interpretations, components and materials, technical requirements, inspection rules, marking, packaging, transport and storage, inspection and monitoring of external prestressing tendons (hereinafter referred to as external tendon).

This standard is applicable to newly-built prestressed concrete girder bridge structures. Reference may be made to this standard for the external tendons used for maintenance and reinforcement of existing bridge structures and for other structures. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 30827-2014

National Standard of the People's Republic of China

ICS
77.140.65
Classification
H 49

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Symbols and interpretations
  • 5 Components and materials
  • 5.1 General requirements
  • 5.2 External prestressing tendon
  • 5.3 Deviator
  • 5.4 Anchorage devices
  • 5.5 Damper
  • 5.6 Accessories
  • 6 Technical requirements
  • 6.1 General requirements
  • 6.2 Corrosion protection performance
  • 6.3 Anchoring performance of anchorage device
  • 6.4 Under-anchor load transfer performancecc
  • 6.5 Fatigue performance of external prestressing tendon components
  • 6.6 Static load strength of the deviator
  • 6.7 Wear resistance of the external protective layer for the deviator zone of the external prestressing tendon
  • 6.8 Filling performance of the duct
  • 6.9 Replaceability of external tendon
  • 6.10 Restressability of external tensile elements of tendon
  • 6.11 Tightness of anchorage zone
  • 7 Inspection rules
  • 7.1 Inspection classification
  • 7.2 Type inspection
  • 7.3 End-of-manufacturing inspection
  • 7.4 Receiving inspection
  • 8 Marking, packaging, transport and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transport and storage
  • 9 Construction
  • 9.1 Blanking and fabrication
  • 9.2 Installation and tensioning
  • 9.3 Grouting with cement slurry for filling
  • 9.4 Construction acceptance
  • 10 Inspection and monitoring
  • 10.1 General requirements
  • 10.2 Inspection and monitoring items
  • 10.3 Inspection information feedback and processing
  • Annex A (Normative) Cement slurry materials used for filling
  • Annex B (Informative) Selection and configuration of external prestressing tendon components
  • Annex C (Normative) Anchorage performance test of anchorage device under static load
  • Annex D (Normative) Under-anchor load transfer test
  • Annex E (Normative) Fatigue test of components of anchorage device
  • Annex F (Normative) Static load test of deviators
  • Annex G (Normative) Fatigue test of deviator zone of external prestressing tendon
  • Annex H (Normative) Test on outer protective layer of deviator zone of external prestressing tendon
  • Annex I (Normative) Duct filling test
  • Annex J (Normative) External tendon replaceable test
  • Annex K (Normative) Test for restressable tensioning of external tensile elements of tendon
  • Annex L (Normative) Tightness test of anchorage zone

1 Scope

This standard specifies the terms and definitions, symbols and interpretations, components and materials, technical requirements, inspection rules, marking, packaging, transport and storage, inspection and monitoring of external prestressing tendons (hereinafter referred to as external tendon).

This standard is applicable to newly-built prestressed concrete girder bridge structures. Reference may be made to this standard for the external tendons used for maintenance and reinforcement of existing bridge structures and for other structures.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 175 Common portland cement

GB/T 230.1 Metallic materials - Rockwell hardness test - Part 1: Test method (Scales A, B, C, D, E, F, G, H, K, N, T)

GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method

GB/T 254 Semi-refined paraffin wax

GB/T 700 Carbon structural steels

GB/T 1591 High strength low alloy structural steels

GB/T 5224 Steel strand for prestressed concrete

GB/T 5796.1 Trapezoidal screw threads - Part 1: Profiles

GB/T 5796.2 Trapezoidal screw threads - Part 2: System of diameter and pitch

GB/T 5796.3 Trapezoidal screw threads - Part 3: Basic dimensions

GB/T 5796.4 Trapezoidal screw threads - Part 4: Tolerances

GB/T 6402-2008 Steel forgings - Method for ultrasonic testing

GB/T 8162 Seamless steel tubes for structural purposes

GB/T 11352 Carbon steel castings for general engineering purpose

GB/T 14370 Anchorage, grip and coupler for prestressing tendons

GB/T 18365 Technical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge

GB/T 21073 Epoxy-coated seven-wire prestressing steel strand

GB/T 21839-2008 Steel for prestressed concrete - Test methods

GB/T 25823-2010 Individual epoxy-coated wire prestressing steel strand

GB 50204 Code for acceptance of constructional quality of concrete structures

GBJ 132 Basic terms and general symbols of structure deign

CJ/T 297 High density polyethylene sheathing compounds for bridge cable

JB/T 4730.4 Nondestructive testing of pressure equipments - Part 4: Magnetic particle testing

JB/T 5000.13 Heavy mechanical general techniques and standards - Part 13: Packing

JG 161 Unbonded prestressing steel strand

JG/T 3007 Corrosion-resistant and lubricating grease specialized for unbonded tendons

JG/T 5028 Hydraulic jack for prestressing

JG/T 5029 Electric oil pump for pretressing

JGJ 63 Standard of water for concrete

YB/T 152 High strength low relaxation hot-dip galvanized Steel strand for prestress

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GBJ 132 and the following apply.

3.1 external prestressing tendon components

assembly of external prestressing tendon, anchorage device, deviator, damper, etc.

3.2 external prestressing tendon

combination of external tensile elements of tendon and its corrosion prevention and protection

3.3 external tensile elements of tendon

steel strand outside the section of a member that is prestressed

3.4 deviator

device that changes the direction of transmission of force in a prestressing tendon so as to let the external tensile elements of tendon deviate in a centralized way

3.5 damper

device for reducing vibration amplitude of external prestressing tendon and changing natural vibration frequency of external prestressing tendon to avoid resonance with structure

3.6 duct

protective sleeve that is externally wrapped or sleeved on external tensile elements of tendon to prevent corrosion and mechanical damage of the external tensile elements of tendon […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30827-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
34 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30827-2014

$495.00