GB/T 30826-2014Technical conditions for steel strand cable of cable stayed bridge (English PDF)
斜拉桥钢绞线拉索技术条件
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30826-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2014
Implementation date
April 1, 2015
Scope
GB/T 30826-2014 is the English-translated version of 斜拉桥钢绞线拉索技术条件.
GB/T 30826-2014 is the Chinese standard "Technical conditions for steel strand cable of cable stayed bridge".
Its scope clause reads: This standard specifies the cable-stayed bridge cable strand terms and definitions, symbols and descriptions, cable structure, technical requirements, product acceptance inspection cable Inspection, marking, packaging, transportation and storage, cables and corrosion protection, cable installation, replace the cable, the cable inspection.
This standard applies to the use of a single strand PE protective cable-stayed bridge as a tension member strand cable (hereinafter referred to as cable) is provided Design, testing and installation.
This standard applies to highways and urban roads in the cable-stayed bridge, cable structure may also refer to other works use.
Found what you need?
Document preview — GB/T 30826-2014
National Standard of the People's Republic of China
- ICS
- 77.140.65
- Classification
- H 49
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and
- 5 Cable structure
- 5.1 The main structure and composition
- 5.2 Pull end anchoring section and paragraph structure transition
- 5.3 fixed end anchoring section and Transitional Section
- 5.5 saddle segment structure
- 5.6 Annex
- 6 Technical requirements
- 6.1 cable body
- 6.2 anchorage assembly
- 6.3 Shock Absorber
- 6.4 saddle
- 7 cable product acceptance testing
- 7.1 Inspection classification
- 7.2 Test Item
- 7.3 factory inspection Batch
- 7.4 test results to determine
- 8 signs, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport and storage
- 9.1 General Provisions
- 9.2 Cable and corrosion protection requirements
- 10 Cable Installation
- 10.1 General Provisions
- 10.2 material site acceptance
- 10.3 repair
- 10.4 Installation requirements
- 10.5 Pull the cable force adjustment
- 10.6 Archive
- 11 Replace the cable
- 11.1 General Provisions
- 11.2 Cable replacement conditions
- 12.1 General Provisions
- 12.2 Daily checks
- 12.3 Periodic checks
- 12.4 20 comprehensive appraisal
- 12.5 20 special inspection
- Annex D (normative appendix) PE protective strand durability test
1 Scope
This standard specifies the cable-stayed bridge cable strand terms and definitions, symbols and descriptions, cable structure, technical requirements, product acceptance inspection cable
Inspection, marking, packaging, transportation and storage, cables and corrosion protection, cable installation, replace the cable, the cable inspection.
This standard applies to the use of a single strand PE protective cable-stayed bridge as a tension member strand cable (hereinafter referred to as cable) is provided
Design, testing and installation.
This standard applies to highways and urban roads in the cable-stayed bridge, cable structure may also refer to other works use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard ruler)
GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test methods
RT Test Method. Test Part 1 GB/T 228.1 metallic materials tensile
GB/T 264 Petroleum products - Determination of acid number
GB/T 269 grease and petroleum grease cone penetration assay
GB/T 512 Grease determination of moisture content
GB/T 528 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
GB/T 699 high-quality carbon structural steel
GB /1040.2 T Plastics Determination of tensile properties - Part 2. Test plastics molding and extrusion conditions
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 2361 anti-rust oil heat test method
GB/T 3077 alloy steel
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
GB/T 4162-2008 wrought steel rod ultrasonic testing method
GB/T 4929 Determination of dropping point grease
GB/T 4985 petroleum wax penetration assay
GB/T 5224 prestressed concrete strand
GB/T 5796.1 trapezoidal thread - Part 1. tooth type
GB/T 5796.2 trapezoidal thread - Part 2. The diameter of the pitch series
GB/T 5796.3 trapezoidal threads - Part 3. Basic dimensions
GB/T 5796.4 trapezoidal thread - Part 4. Tolerances
GB/T 6031 Determination of vulcanized rubber or thermoplastic rubber hardness (10 ~ 100IRHD)
GB/T 6402-2008 Steel Forgings Ultrasonic Testing Method
GB/T 8124 trapezoidal thread gauge technical conditions
Part of GB/T 8804.3-2003 Determination of tensile properties of thermoplastics pipes 3. Polyolefin pipes […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30826-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30826-2014
$535.00