GB/T 30811-2014Glass fiber reinforced plastic chimney liners for coal-fired units (English PDF)
燃煤电厂用玻璃纤维增强塑料烟囱内筒
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30811-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2014
Implementation date
February 1, 2015
Scope
GB/T 30811-2014 is the English-translated version of 燃煤电厂用玻璃纤维增强塑料烟囱内筒.
GB/T 30811-2014 is the Chinese standard "Glass fiber reinforced plastic chimney liners for coal-fired units".
Its scope clause reads: This standard specifies the coal-fired power plant chimney reinforced plastic inner tube with a glass fiber (hereinafter referred to as FRP chimney inner tube) terms and definitions, points Category, general requirements, requirements, test methods, inspection rules, marks, transportation, and storage and other lifting displacement.
This standard applies to the concrete outer tube support, run the flue gas temperature does not exceed 93 °C, short-term (less than 30min) flue gas temperature does not exceed Over 121 °C, diameter 4.0m ~ 10.0m coal-fired power plants with FRP chimney inner tube. Other FRP chimney can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30811-2014
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Glass fiber reinforced plastic tube inside the chimney segment
1 Scope
This standard specifies the coal-fired power plant chimney reinforced plastic inner tube with a glass fiber (hereinafter referred to as FRP chimney inner tube) terms and definitions, points
Category, general requirements, requirements, test methods, inspection rules, marks, transportation, and storage and other lifting displacement.
This standard applies to the concrete outer tube support, run the flue gas temperature does not exceed 93 °C, short-term (less than 30min) flue gas temperature does not exceed
Over 121 °C, diameter 4.0m ~ 10.0m coal-fired power plants with FRP chimney inner tube. Other FRP chimney can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1410 solid insulating material volume resistivity and surface resistivity test method
Plastic tensile properties GB/T 1447 fiber reinforced
Performance test method GB/T 1448 fiber-reinforced plastic compression
Plastic bending performance test method GB/T 1449 fiber reinforced
Plastic water absorption test method GB/T 1462 fiber reinforced
Determination of GB/T 1634.2-2004 Plastics deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite material
GB/T 2576 non-fiber-reinforced plastic resin content test methods for melting points
Plastic resin content test method GB/T 2577 glass fiber reinforced
Plastic Barcol hardness test GB/T 3854 enhancements
Thermosetting plastics chemical resistance performance test method GB/T 3857-2005 glass fiber reinforced
GB/T 3961 fiber reinforced plastics
GB/T 8924 fiber reinforced plastic combustion performance test by oxygen index
GB/T 17470 glass fiber chopped strand mat and continuous strand mat
GB/T 18369 glass fiber rovings
GB/T 18370 fiberglass roving
Chimney design specification GB 50051-2002
GB 50011-2010 Seismic Design of Buildings
GB 50009-2012 Load Code for Building Structures
3 Terms and Definitions
GB/T 3961 defined by the following terms and definitions apply to this document.
3.1 Glass fiber reinforced plastic tube inside the chimney segment
In the acid of glass fiber reinforced material, vinyl ester resin matrix materials, using filament winding, having a length
Located inside a cylindrical concrete chimney unit.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30811-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 30811-2014
$355.00