Valid

GB/T 30653-2014Test method for crystal quality of III-nitride epitaxial layers (English PDF)

III族氮化物外延片结晶质量测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30653-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2014

Implementation date

September 1, 2015

Scope

GB/T 30653-2014 is the English-translated version of III族氮化物外延片结晶质量测试方法.

GB/T 30653-2014 is the Chinese national method for judging the crystal quality of III-nitride epitaxial wafers by high-resolution X-ray diffraction.

It applies to single and multilayer (Ga, In, Al)N heteroepitaxial films grown on oxide substrates such as Al2O3 and ZnO or on semiconductor substrates such as GaN, Si, GaAs and SiC, and may be taken as a reference for other heteroepitaxial films.

Quality is read from rocking curves, the detector held at the diffraction angle while the sample is rocked, and from the full width at half maximum of the diffraction peak.

The document defines the symmetric, asymmetric and skew-symmetric diffraction geometries used and the screw and edge dislocations they bring out. Epitaxy producers and materials laboratories use it. It was issued on 31 December 2014 and has applied since 1 September 2015.

Found what you need?

Document preview — GB/T 30653-2014

National Standard of the People's Republic of China

ICS
77.040.20
Classification
H 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Symbol

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

1 Scope

This standard specifies the use of high-resolution X-ray diffraction test III nitride epitaxial wafer crystalline quality.

This standard applies to the oxide substrate (Al2O3, ZnO, etc.) or epitaxial growth on the (GaN, Si, GaAs, SiC, etc.) of a semiconductor substrate Nitride (Ga, In, Al) N monolayer or multilayer heteroepitaxial crystal quality test sheet. The crystalline quality of the test piece may also be other heteroepitaxial The reference standard.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Symmetrical diffraction symmetricdiffraction

Incident beam and the reflected beam relative to the sample surface normal crystal diffraction occurs in a symmetrical position, the angle of incidence and reflection angle equal.

2.2 Asymmetric diffraction

If the diffraction crystal surface and the sample surface has a angle chi, the incident beam and the reflected beam relative to the sample surface normal crystal in a non-symmetrical position, the angle of incidence Diffraction occurs when the angle of reflection is not equal.

2.3 Skew-symmetric diffraction skewdiffraction

Incident beam and the reflected beam relative to the normal of the sample surface in a symmetrical position, while the diffraction crystal surface with respect to the sample surface has a tilt angle chi, this Diffraction occurs when the skew-symmetric diffraction.

2.4 Screw dislocation

A certain part of the crystal relative to the rest slip occurs, spiraling atomic planes along an axis, the axis around every week A rising surface atom spacings. In the center of the axis is a screw dislocation.

2.5 Edge dislocation

Crystal under the action of shear stress, in part with respect to the other part along a certain crystallographic plane (sliding surface) and grain (sliding direction) to generate bit Shift, thereby forming the extra half plane of atoms, also formed the edge dislocation.

2.6 Rocking curve

The 2 theta B position detector fixed sample (hkl) planes, the front of the detector without the slit, the sample in the vicinity of the diffraction angle deltatheta position to shake Pendulum, diffraction intensity will vary with the angle, and omega diffraction intensity curve obtained records.

3 Symbol

The following symbols apply to this document.

FWHM FWHM of the diffraction peak at a diffraction peak half high full width.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30653-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30653-2014

$135.00