GB/T 30649-2014Rubber Articles for sound barriers (English PDF)
声屏障用橡胶件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30649-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2014
Implementation date
July 1, 2015
Scope
GB/T 30649-2014 is the English-translated version of 声屏障用橡胶件.
GB/T 30649-2014 is the Chinese standard "Rubber Articles for sound barriers". Its scope clause reads: This standard specifies the requirements for sound barrier with rubber parts, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to railways, highways, urban rail transit, urban road noise barrier with rubber mats, rubber and other rubber (hereinafter referred to as rubber Plastic pieces). Its clauses include requirements.
Found what you need?
Document preview — GB/T 30649-2014
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Classification
- G 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 appearance quality
- 3.2 Size
1 Scope
This standard specifies the requirements for sound barrier with rubber parts, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to railways, highways, urban rail transit, urban road noise barrier with rubber mats, rubber and other rubber (hereinafter referred to as rubber
Plastic pieces).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 528 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
GB/T 529 Determination of vulcanized rubber or thermoplastic rubber tear strength (Trouser, angle and crescent test pieces)
GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness)
GB/T 2941 rubber physical test method for preparing and conditioning General Procedure
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
GB/T 3672.1-2002 Rubber Products tolerance - Part 1. Dimensional tolerances
GB/T 7758 vulcanized rubber low temperature performance measured temperature retraction procedure (TR)
GB/T 7759 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set determination
GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test
GB/T 15256 vulcanized rubber - Determination of low-temperature brittleness (multiple test piece method)
3 Requirements
3.1 appearance quality
Crack-free surface, within each meter area of not greater than the number of bubbles 10mm2 no more than three, no other impurities and affect the use of defect.
3.2 Size
Commonly used cross-sectional schematic view of a rubber member as shown in Figure 1, Figure 2, Figure 3 and Figure 4.
Rubber wall thickness dimensional tolerances shall comply with the requirements of Table 1, and other parts of the dimensional tolerances according to GB/T 3672.1-2002 in the E2 class
Tolerance selection, special requirements by both parties through consultation.
Figure 1 rubber […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30649-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30649-2014
$145.00