GB/T 30584-2014Seamless steel pipes for crane jib (English PDF)
起重机臂架用无缝钢管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30584-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2014
Implementation date
April 1, 2015
Scope
GB/T 30584-2014 is the English-translated version of 起重机臂架用无缝钢管.
GB/T 30584-2014 is the Chinese national standard covering seamless steel pipes for crane jib. It was issued on 6 May 2014 and has been in force since 1 April 2015, as a first edition.
The document is under the responsibility of the China Iron and Steel Association. This page is published from the official record of the 2014 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 30584-2014
National Standard of the People's Republic of China
- ICS
- 77.140.75
- Classification
- H 48
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 1.2 Principle
- 1.3 Reagents
- 2 Normative references
- 3.1 General Provisions
- 3.2 Nuclear Safety Criterion
- 4 Designation expression
- 4.1 General
- 4.2 Removal of surface defects
- 4.3 Traffic and Transportation
- 4.4 Working Area
- 5 Calculation of Analysis Results
- 5.2 Main Production Facilities Layout
- 5.3 Auxiliary Facilities Layout
- 5.4 Administration Buildings Area Layout
- 5.5 Outside Construction Layout
- 5.6 Physical Protect System and Entrance Layout
- 6 Precision
- 6.2 Determination of Design Elevation
- 6.3 Step Type Design
- 6.4 Earth (Stone) Work
- 6.5 Water Drainage of Site
- 7 Assessment of results
- 7.2 Underground Pipeline
- 7.3 Overhead Pipeline
- 8 Test report
- 8.2 Transfer Station (Transshipment Wharf)
- 8.3 Railway
- 8.4 Road
- 8.5 Water Transport
- 9.2 Vegetation Arrangement
- 9.3 Tree Species Selection
1 Foreword
GB/T 30584-2014 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 6 May 2014 and has been in force since 1 April 2015.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
GB/T 30584-2014 falls under ICS 77.140.75, in the field of metallurgy.
This catalogue holds 3,436 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 30584-2026 (later edition)
Standards on related subjects:
GB/T 32957-2016 — Cold-drawn or cold-rolled precision inside diameter seamless steel tubes for hydraulic and pneumatic system service
GB/T 32569-2016 — Welded stainless steel tubes for seawater desalination plants
GB/T 31315-2014 — Cold drawn or cold rolled precision weld steel tubes for mechanical structures
GB/T 13295-2026 — Ductile iron pipes,fittings and accessories for water or gas applications
GB/T 12772-2026 — Cast iron pipes, fittings and accessories with flexible joint for building drainage
5 Classification and status
International classification (ICS): 77.140.75
Chinese Standard Classification (CCS): H 48
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30584-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30584-2014
$150.00