Valid

GB/T 30516-2014Bitumen with high viscosity and elastic recovery for pavement (English PDF)

高粘高弹道路沥青

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30516-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 13, 2013

Implementation date

June 1, 2014

Scope

GB/T 30516-2014 is the English-translated version of 高粘高弹道路沥青.

GB/T 30516-2014 is the Chinese standard "Bitumen with high viscosity and elastic recovery for pavement".

Its scope clause reads: This standard specifies the terms and definitions, product classification, requirements and test methods, inspection rules, as well as marking, packaging, transportation and storage of bitumen with high viscosity and elastic recovery for pavement.

This standard is applicable to two designations of bitumen with high viscosity and elastic recovery for pavement produced by bitumen modification process with bitumen for heavy traffic road pavement or vacuum residue produced by atmospheric vacuum process with petroleum as raw material.

This standard is applicable to bitumen with high viscosity and elastic recovery for pavement for road stress absorbing layer, bridge deck pavement and drainage pavement, and can be used by reference for other pavements with similar requirements.

Its clauses include terms and definitions; product classification; requirements and test methods.

Found what you need?

Document preview — GB/T 30516-2014

National Standard of the People's Republic of China

ICS
75.140
Classification
E 43

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Product classification
  • 5 Requirements and test methods
  • 6 Inspection rules
  • 7 Marking, packaging, transportation and storage

1 Scope

This standard specifies the terms and definitions, product classification, requirements and test methods, inspection rules, as well as marking, packaging, transportation and storage of bitumen with high viscosity and elastic recovery for pavement.

This standard is applicable to two designations of bitumen with high viscosity and elastic recovery for pavement produced by bitumen modification process with bitumen for heavy traffic road pavement or vacuum residue produced by atmospheric vacuum process with petroleum as raw material. This standard is applicable to bitumen with high viscosity and elastic recovery for pavement for road stress absorbing layer, bridge deck pavement and drainage pavement, and can be used by reference for other pavements with similar requirements.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 267 Petroleum products - Determination of flash and fire points - Open cup

GB/T 4507 Standard test method for softening point of bitumen - Ring-and-ball apparatus

GB/T 4508 Standard test method for ductility of bitumen

GB/T 4509 Standard test method for penetration of bitumen

GB/T 4756 Method for manual sampling of petroleum liquids

GB/T 5304 Asphalt thin-film oven test method

GB/T 11147 Standard practice for sampling bituminous materials

SH 0164 Petroleum and related products packaging, storage, transportation and acceptance of delivery rules

SH/T 0557 Determination of viscosity of petroleum asphalt (vacuum capillary method)

SH/T 0735 Standard test method for toughness and tenacity of bitumen

SH/T 0737 Standard test method for elastic recovery of bituminous materials by ductilometer

SH/T 0739 Standard test method for viscosity determination of unfilled asphalt using the Brookfield thermosel apparatus

SH/T 0740 Standard test method for separation of polymer modified asphalt

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1

bitumen with high viscosity and elastic recovery bitumen with viscosity (60 °C) greater than 20,000 Pa·s and elastic recovery (25 °C) greater than 85%

4 Product classification

For the purpose of this standard, the products are classified into two designations by usage. AVE-1 is used for drainage pavement and bridge deck pavement; AVE-2 is used for stress absorbing layer. A stands for asphalt, which is the first letter of the English word asphalt; V is the first letter of the English word viscosity; E is the first letter of the English word elasticity.

5 Requirements and test methods

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30516-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30516-2014

$105.00