GB/T 30414-2013Norms of collection for music signals of musical instruments (English PDF)
乐器音乐信号采集规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30414-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
December 1, 2014
Scope
GB/T 30414-2013 is the English-translated version of 乐器音乐信号采集规范.
GB/T 30414-2013 lays down the norms for collecting the music signals of musical instruments.
Clause 1 states that it specifies the terms and definitions, the acquisition principles, the acquisition requirements and the collection procedures for the acquisition of musical instrument signals, and that it applies to the acquisition of the acoustic music signal of musical instruments; no exclusion is stated.
Clause 2 cites GB/T 3241-2010, GB/T 3767-1996, GB/T 3785.1-2010, GB/T 3947-1996, GB/T 5440-1985, GB/T 12060.5-2011 and GB/T 20441.1-2010.
Clause 3, Terms and Definitions, takes over the terms of GB/T 3947-1996 and adds three geometric ones: the reference plane, whose definition the draft garbles past reporting; the reference point, the geometric centre of the instrument reference plane; and the reference axis, a straight line through the reference point in a prescribed direction.
Clause 4, Acquisition Principles, is a single sentence requiring the collection of the acoustic music signal of an instrument to reflect its musical sound accurately.
Clause 5, Acquisition Requirements, opens with 5.1 Acquisition Environment and its 5.1.1 Environmental conditions, where the draft prints a temperature of 20 to 25 degrees C and then breaks off, so the rest of the acquisition requirements and the collection procedures announced in the scope are not shown; the foreword also warns that some of the content may involve patents.
It was proposed by China National Light Industry Council and is kept by SAC/TC371, under ICS 97.200.20 and Chinese classification Y58, with about 6,661 words estimated.
It was issued on 31 December 2013 and has applied since 1 December 2014; the page does not say which edition it replaces.
Found what you need?
Document preview — GB/T 30414-2013
National Standard of the People's Republic of China
- ICS
- 97.200.20
- Classification
- Y 58
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions GB/T 3947-1996 and defined the following
- 4 Acquisition Principles
- 5 Acquisition Requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the terms and definitions musical instrument signal acquisition, acquisition principles, requirements gathering and collection procedures.
This standard applies to instruments acquisition acoustic music signal.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3241-2010 electro-acoustics octave and fractional octave filters
GB/T 3767-1996 Acoustics sound pressure Determination of sound power levels of noise sources reflecting plane free field engineering method
GB/T 3785.1-2010 Electric Acoustic Sound Level Meters - Part 1: Specification
GB/T 3947-1996 Acoustics Terminology
GB/T 5440-1985 broadcast in stereo recorder
GB/T 12060.5-2011 Sound system equipment - Part 5: Methods for measuring performance main speaker
GB/T 20441.1-2010 Electric Acoustic Measurement microphones - Part 1: Laboratory standard microphones
3 Terms and Definitions
GB/T 3947-1996 and defined the following terms and definitions apply to this document.
3.1 Reference plane
Involving musical sound sources face certain physical properties of the composition.
3.2 Reference point
Instrument reference plane of the geometric center.
3.3 Reference axis
A reference point and over a predetermined direction by a straight reference surface.
4 Acquisition Principles
Acoustic music collection instrument signal should accurately reflect the musical soundtrack.
5 Acquisition Requirements
5.1 Acquisition Environment
5.1.1 Environmental conditions
Temperature. 20 °C ~ 25 °C;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3241-2010Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
- GB/T 3767-1996Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane
- GB/T 3785.1-2010Electroacoustics - Sound level meters - Part 1: Specifications
- GB/T 3947-1996Acoustical terminology
- GB/T 12060.5-2011Sound system equipment -- Part 5: Methods of measurement for main characteristics of loudspeakers
- GB/T 20441.1-2010Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones
GB/T 5440-1985
Similar standards
How to Download GB/T 30414-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12060.5-2011 — Sound system equipment -- Part 5: Methods of measurement for main characteristics of loudspeakers
GB/T 20441.1-2010 — Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones
GB/T 3241-2010 — Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
Secure payment via Stripe
Payments accepted
GB/T 30414-2013
$85.00