GB/T 30400-2013Safety and hygiene requirements of filling materials in toys (English PDF)
玩具填充物安全和卫生要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30400-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
December 1, 2014
Scope
GB/T 30400-2013 is the English-translated version of 玩具填充物安全和卫生要求.
GB/T 30400-2013 sets safety and hygiene requirements for the filling materials used in toys.
Clause 1 states that the standard specifies the definition of toy filler, the requirements and the test methods, that it applies to toy fillers such as chemical fibres, natural fibres, foams, sponges, plastic granules, plant seeds and paper, and that it does not apply to liquid or paste fillings in toys.
Clause 3 defines the filler as the material filled inside a toy so that the toy shows a predetermined shape, repeats that list of materials and expressly excludes functional parts inside the toy such as sound, power and support components and electronic components; it defines foreign matter as a substance present in the filler that was not intentionally added.
Clause 4 carries the requirements. The general requirement in 4.1 is that the filler be evenly and firmly enclosed in the toy and that, after the conditioning and the abuse tests provided for in GB 6675.2, it must not fall off or become exposed, unless what becomes exposed or sheds still meets GB 6675.2.
Subclause 4.2 requires the filler to be sterilized material or new material, with plant seeds inactivated first; 4.3 forbids dangerous impurities such as scrap metal, nails, needles, wood chips, broken glass or plastic and other metal or sharp objects, and refers their test to 5.1; 4.4 forbids excrement and other unhealthy substances from insects, birds and rodents, and begins a prohibition on fleas, ticks and bugs before the draft breaks off.
The test methods announced in clause 1 are therefore not shown. Clause 2 cites GB 6675.2 and GB 15979-2002.
The page gives the Chinese classification as Y57 and the international classification as 97.200.50, estimates the document at about 9,945 words and names no superseded edition; the standard was issued on 31 December 2013 and has applied since 1 December 2014.
Found what you need?
Document preview — GB/T 30400-2013
National Standard of the People's Republic of China
- ICS
- 97.200.50
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China National Light Industry Council.
1 Scope
This standard specifies the definition of toy filler, requirements and test methods.
This standard applies to toys fillers. such as chemical fibers, natural fibers, foams, sponges, plastic granules, plant seeds, paper.
This standard does not apply to toys for filling liquid, paste and paste.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 6675.2 Safety of toys - Part 2: Mechanical and physical properties
GB 15979-2002 Hygienic standard for disposable sanitary products
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Filler
Toys filled in the interior so as to exhibit a predetermined shape of materials, including. chemical fibers, natural fibers, foams, sponges, plastic pieces Grains, seeds, paper. It does not include the functional components such as the toy inside the sound, power, support, electronic components and other parts.
3.2 Impurities
Substance referred to is not intentionally added filler present.
4 Requirements
4.1 General Requirements
Packing filler should be evenly and firmly closed in toys. In the foreseeable normal use according to the provisions of GB 6675.2 in harmony After treatment abuse tests can not fall off or be exposed; unless exposed after shedding or still meet the requirements of GB 6675.2.
4.2 Material Requirements
The filler should be sterilized or new material, the use of plant seeds need to go through inactivation.
4.3 Dangerous impurities
Scrap metal, nails, needles and wood chips, broken pieces of glass or plastics. metal or sharp objects and other dangerous impurities, such as should not exist.
Test according to 5.1 (dangerous impurities and contaminants).
4.4 Pollutants
There should be no excrement or other unhealthy substances from insects, birds and rodents; there should be no fleas, ticks, bugs, etc. can be […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30400-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 6675.2-2014 — Safety of toys-Part 2:Mechanical and physical properties
GB 6675.2-2025 — Safety of toys - Part 2: Mechanical and physical properties
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 30400-2013
$145.00