GB/T 30371-2013Standard of electron linear accelerator engineering for non-destructive testing (English PDF)
无损检测用电子直线加速器工程通用规范
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30371-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
March 1, 2015
Scope
GB/T 30371-2013 is the English-translated version of 无损检测用电子直线加速器工程通用规范.
GB/T 30371-2013 is the Chinese standard "Standard of electron linear accelerator engineering for non-destructive testing".
Its scope clause reads: This standard specifies the NDT electron linear accelerator project construction technical requirements of accelerator devices, motion machinery and tooling installed Set of technical requirements, ray nondestructive testing building engineering design requirements, construction and installation engineering and quality supervision, inspection and acceptance and so on.
This standard applies to energy for the following non-destructive testing 15MeV electron linear accelerator project, including the film X-ray photography, computing X-ray imaging machine (CR), digital X-ray imaging, digital X-ray radiographic (DR) and industrial X-ray computer tomography (ICT) and the like. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30371-2013
National Standard of the People's Republic of China
- ICS
- 27.120
- Classification
- F 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 project consisting of
- 5 accelerator means
- 6 motion machinery and tooling means
- 8 Ray NDT Engineering Building
- 9 Installation
- 10 test conditions and methods
- 11 13 acceptance
- Appendix A (normative) individual dose limits and different tissues or organs, the effective dose
- Annex C (informative) shielding calculation method
- Annex D (normative) Methods of measurement
1 Scope
This standard specifies the NDT electron linear accelerator project construction technical requirements of accelerator devices, motion machinery and tooling installed
Set of technical requirements, ray nondestructive testing building engineering design requirements, construction and installation engineering and quality supervision, inspection and acceptance and so on.
This standard applies to energy for the following non-destructive testing 15MeV electron linear accelerator project, including the film X-ray photography, computing
X-ray imaging machine (CR), digital X-ray imaging, digital X-ray radiographic (DR) and industrial X-ray computer tomography (ICT) and the like.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 2894 Safety Signs and use guidelines
GB 3095 Ambient Air Quality Standard
GB/T 3811 crane design specifications
GB 18871-2002 ionizing radiation protection and safety of radiation sources basic standards
GB/T 20129-2006 NDT electron linear accelerator
GB 50016 architectural design code for fire protection
GB 50223-2009 standard classification of seismic construction engineering
GB 50278 lifting equipment installation engineering construction and acceptance
GB Z1-2010 Design of Industrial Enterprises hygiene standards
GB Z2.1-2007 Workplace Hazardous Occupational Exposure Limits - Part 1. Chemical hazardous agents
GB Z2.2-2007 Workplace Hazardous Occupational Exposure Limits - Part 2. physical factors
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Electron linear accelerator project
Electron linear accelerator works by the electron linear accelerator means motion machinery and tooling means ray nondestructive testing buildings and other components.
3.2
Electron linear accelerator means electronlinearacceleratorfacility
Using high-frequency electric field to accelerate electrons moving along a straight track and targeting device generating X-rays.
3.3 Motion machinery and tooling equipment
X-ray head required, artifacts, and (or) detectors motion machinery and equipment.
3.4 X-ray nondestructive testing building project buildingengineeringforX-raynon-destructivetesting
X-ray non-destructive testing for the implementation of the required structures construction works.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30371-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 30371-2013
$375.00