Valid

GB/T 30269.304-2019Information technology—Sensor networks—Part 304:Communication and information exchange:Technical requirements of soundwave communication system (English PDF)

信息技术 传感器网络 第304部分:通信与信息交换:声波通信系统技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30269.304-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

March 1, 2020

Scope

GB/T 30269.304-2019 is the English-translated version of 信息技术 传感器网络 第304部分:通信与信息交换:声波通信系统技术要求.

GB/T 30269.304-2019 is the Chinese national standard for soundwave communication between sensor network nodes. It is Part 304 of GB/T 30269, specifying the system composition and its general and technical requirements, for a transmission distance of 10 m.

The system has a transmitting end with a processor and speaker and a receiving end with a pickup and processing part.

The general requirements cover security, accuracy, reliability, scalability, fault tolerance and communication method; the technical requirements fix the communication frequency, the transmitter and receiver, the modulation method, the data rate, the communication establishment time, the bit error rate, the range and the data frame format.

It defines acoustic communication and sound wave payment, cites GB/T 2312-1980 and GB/T 30269.2-2013, and gives an example in Annex A. It was issued on 30 August 2019 and has applied since 1 March 2020.

Found what you need?

Document preview — GB/T 30269.304-2019

National Standard of the People's Republic of China

ICS
35.110
Classification
L 79

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Abbreviations
  • 5 Acoustic communication system composition
  • 6 General requirements
  • 6.1 Security
  • 6.2 Accuracy
  • 6.3 Reliability
  • 6.4 Scalability
  • 6.5 Fault tolerance
  • 6.6 Communication method
  • 7 Technical requirements
  • 7.1 Communication frequency
  • 7.2 Transmitter
  • 7.3 Receiver
  • 7.4 Modulation method
  • 7.5 Transmission data rate
  • 7.6 Communication establishment time
  • 7.7 Bit Error Rate
  • 7.8 Transmission distance
  • 7.9 Data Frame Format
  • Appendix A (informative appendix) Sonic Communication Application Example

Foreword

GB/T 30269 "Information Technology Sensor Network" is divided into the following parts.

--- Part 1. Reference architecture and general technical requirements;

--- Part 2. Terminology;

--- Part 301. Communication and information exchange. low-speed wireless sensor network network layer and application support sub-layer specification;

--- Part 302. Communication and Information Exchange. High-reliability wireless sensor network media access control and physical layer specifications;

--- Part 303. Communication and information exchange. IP-based wireless sensor network network layer specification;

--- Part 304. Communication and information exchange. Technical requirements for acoustic wave communication systems;

--- Part 401. Collaborative Information Processing. Services and interfaces supporting collaborative information processing;

--- Part 501. Identification. Sensing node identifier preparation rules;

--- Section 502. Identification. Sensing node identifier resolution;

--- Section 503. Identification. Sensing node identifier registration procedures;

--- Part 504. Identification. sensor node identifier management;

--- Part 601. Information Security. General Technical Specifications;

--- Part 602. Information Security. Low-rate wireless sensor network network layer and application support sub-layer security specifications;

--- Part 701. Sensor interface. signal interface;

--- Part 702. Sensor interface. data interface;

--- Section 801. Testing. General requirements;

--- Part 802. Testing. Low-speed wireless sensor network media access control and physical layer;

--- Part 803. Testing. Low-speed wireless sensor network network layer and application support sub-layer;

--- Part 804. Test. Sensor Interface;

--- Section 805. Testing. Sensor Gateway Test Specification;

--- Section 806. Testing. Sensing node identifier encoding and parsing;

--- Part 807. Testing. Network transmission security;

--- Part 808. Testing. Low-rate wireless sensor network network layer and application support sub-layer security;

--- Part 809. Testing. IP-based wireless sensor network network layer protocol;

--- Part 901. Gateway. General technical requirements;

--- Part 902. Gateway. Remote management technical requirements;

--- Section 903. Gateway. Logical interface;

--- Part 1001. Middleware. Sensor network node interface.

This part is part 304 of GB/T 30269.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 30269 specifies the composition, general requirements and technical requirements of acoustic communication systems with a transmission distance of 10 m.

This section applies to the design, development and application of systems for the communication of sound waves by two or more sensing nodes in a sensor network.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2312-1980 Basic set of Chinese character coded character set for information exchange

GB/T 30269.2-2013 Information technology sensor networks - Part 2: Terminology

3 Terms and definitions

The following terms and definitions as defined in GB/T 30269.2-2013 apply to this document.

3.1 Acoustic communication (sound wave communication)

Two or more sensing nodes use sound waves as a medium to transmit information as an acoustic signal for short-distance point-to-point or Single-to-multipoint communication.

3.2 Sound wave payment

The process of transmitting payment information by using acoustic wave communication to realize payment.

4 Abbreviations

The following abbreviations apply to this document.

CRC cyclic redundancy check (cyclic redundancy check)

FSK frequency shift keying (frequency shift keying)

5 Acoustic communication system

The acoustic wave communication system includes a transmitting end and a receiving end, wherein the transmitting end includes a processor and a speaker, and the receiving end includes a pickup and processing. The system architecture is shown in Figure 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 30269.304-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30269.304-2019

$145.00