GB/T 30245.2-2013Remote input and output instruments for industrial process measurement and control systems—Part 2: Performance evaluating methods (English PDF)

1 Scope

This section GB/T 30245 requirements for industrial process measurement and control systems with remote input and output devices - Performance evaluation and inspection

Inspection rules, including test conditions, the test sample, the normal work and functions of type testing, electromagnetic compatibility (EMC) type testing and verification, security

Whole routine testing, inspection rules and other considerations.

This section applies to the sensors and actuators without an industrial process measurement and control system components with the remote input and output devices.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h

12h cycle)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock

GB/T 2423.7-1995 Environmental testing for electric and electronic products Part 2. Test Ec and guidance. Drop and turn

Down (Primarily for equipment - type specimens)

GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan

GB 4208-2008 shell protection (IP code)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements

GB 4824-2004 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

GB/T 4857.5 packaging transport package drop test methods

GB/T 14048.10-2008 voltage switchgear and control equipment Part 5-2. Control circuit devices and switching elements proximity switch

GB/T 16842-2008 housing for people and equipment protection test with a test

GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test

GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test

GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test

GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test

GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field

GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test

GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test […]