GB/T 30245.1-2013Remote input and output instruments for industrial process measurement and control systems—Part 1: General technical conditions (English PDF)
工业过程测量和控制系统用远程输入输出设备 第1部分：通用技术条件
This is a limited preview
Buy now to download the full PDF (33 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30245.1-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
GB/T 30245.1-2013 is the English-translated version of 工业过程测量和控制系统用远程输入输出设备 第1部分：通用技术条件.
GB/T 30245.1-2013 is the Chinese standard "Remote input and output instruments for industrial process measurement and control systems—Part 1: General technical conditions".
Its scope clause reads: This section GB/T 30245 requirements for industrial process measurement and control systems with remote input and output devices (hereinafter referred to as "remote I/O ") of the general technical conditions, including terms and definitions, basic requirements for normal operating conditions and requirements, functional requirements, electromagnetic compatibility (EMC) requirements, the manufacturer information requirements.
This section applies to the sensors and actuators without an industrial process measurement and control system components with the remote input and output devices. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 30245.1-2013
National Standard of the People's Republic of China
- ICS
- 35.100
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 4 Basic requirements
- 5 normal operating conditions and requirements
- 6 7 functional requirements
- 7 Electromagnetic compatibility (EMC) requirements
- 8 Information provided by the manufacturer
- 9 provided by the manufacturer of electromagnetic compatibility (EMC) Information
- 10 safety information provided by the manufacturer
- Appendix A (informative) Digital input operating range of the standard formula
- Appendix B (Informative Appendix) C Area --- EMC immunity level
- References
- 1 input/output parameters
- 4 digital outputs instantaneous current overload waveform
- 5 Functional ground terminal markings
- 6 anti-EMC District
- 20 Table 14 emission limits
1 Scope
This section GB/T 30245 requirements for industrial process measurement and control systems with remote input and output devices (hereinafter referred to as "remote
I/O ") of the general technical conditions, including terms and definitions, basic requirements for normal operating conditions and requirements, functional requirements, electromagnetic compatibility (EMC) requirements, the manufacturer information requirements.
This section applies to the sensors and actuators without an industrial process measurement and control system components with the remote input and output devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 156-2007 standard voltage
GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment
GB 3836.2 explosive atmospheres - Part 2. the flameproof enclosure "d" protection equipment
GB 3836.4 explosive atmospheres - Part 4. the intrinsically safe "i" protection equipment
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB/T 5465.1-2009 Graphical symbols for electrical equipment - Part 1. Overview and classification
GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical
Control circuit devices
GB/T 15969.1 Programmable controllers - Part 1. General Information
GB/T 16935.1-2008 within low-voltage systems Insulation coordination for equipment - Part 1. Principles, requirements and tests
GB/T 17799.1-1999 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environment - Immunity
GB/T 17799.2-2003 Electromagnetic compatibility - Generic standards - Immunity for industrial environments
GB 17799.4-2012 Electromagnetic compatibility - Generic emission standard for industrial environments
GB/T 30245.2-2013 industrial process measurement and control systems with remote input and output devices - Part 2. Methods for performance evaluation
IEC 61000-4-18.2006 Electromagnetic compatibility - Part 4-18 Testing and measurement techniques attenuation Sasser immunity test
[Electromagneticcompatibility (EMC) -Part 4-18. Testingandmeasurementtechniques-Dampedos- cilatorywavesimmunitytest]
3 Terms and definitions, abbreviations
3.1 Terms and Definitions
GB/T 15969.1 as defined in the following terms and definitions apply to this document.
3.1.1 Analog input
Converted into a continuous signal for remote I/O using a discrete multi-bit binary number of remote I/O.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30245.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 30245.2-2013 — Remote input and output instruments for industrial process measurement and control systems—Part 2: Performance evaluating methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 30245.1-2013
$500.00