GB/T 30241.2-2013Zener diode safety barrier—Part 2: Methods of evaluating the performance (English PDF)
齐纳二极管安全栅 第2部分:性能评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30241.2-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
GB/T 30241.2-2013 is the English-translated version of 齐纳二极管安全栅 第2部分:性能评定方法.
GB/T 30241.2-2013 is the Chinese standard "Zener diode safety barrier—Part 2: Methods of evaluating the performance". Its scope clause reads: This section provides the Zener diode barrier performance evaluation methods and inspection rules.
This section applies to industrial process measurement and control system zener diode barrier. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30241.2-2013
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test Method
- 4.1 Test conditions
- 4.2 terminal resistor
- 4.3 Operating Voltage
- 4.4 Maximum operating voltage
- 4.5 intrinsically safe circuit test
- 4.6 and safety performance of the relevant tests
- 4.7 and influence the amount of the relevant tests
- 4.8 Structure of test equipment
- 4.9 Explosion-proof performance test
- 4.10 Visual inspection
- 4.11 Transport Test
- 5 Inspection Rules
- 5.1 zener diode safety barrier Inspection Rule
- 5.2 factory inspection
- 5.3 Type test
- 6 Other Considerations
- 6.1 General
- 6.2 Literature
- 6.3 Installation
- 6.4 Inspection and Maintenance
- 6.5 surface protection for
- 6.6 Design Features
- 6.7 Adjustable parameters
- 6.8 Tools and equipment
- 7 test reports and documentation
- 1 Zener diode barrier Working voltage test wiring diagram
1 Scope
This section provides the Zener diode barrier performance evaluation methods and inspection rules.
This section applies to industrial process measurement and control system zener diode barrier.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 30241.1-2013 zener diode safety barriers - Part 1. General requirements
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.4 electric and electronic products environmental testing procedures. Test Db Damp heat test (12h 12h cycle)
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB 3836.1-2010 explosive atmospheres - Part 1. General requirements for equipment
GB 3836.4-2010 Explosive atmospheres - Part 4. the intrinsically safe "i" protection equipment
GB 3836.15 Electrical apparatus for explosive gas atmospheres - Part 15. Electrical installations in hazardous locations (except coal mines)
GB 3836.16 Electrical apparatus for explosive gas atmospheres Part 16. Electrical installations inspection and maintenance (other than mines)
GB 4208 housing protection (IP Code)
GB 9364 (all parts) miniature fuses
GB/T 16511 Electrical and electronic measuring equipment - Documentation
GB/T 17212 industrial process measurement and control - Terms and definitions
GB/T 17614.1 industrial process control systems Transmitters - Part 1. Methods of evaluating performance
GB/T 18271.1 process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General
GB/T 18271.2 process measurement and control devices - General methods and procedures for evaluating performance - Part 2. under reference conditions test
GB/T 18271.3 process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities test
GB/T 18271.4 process measurement and control devices - General methods and procedures for evaluating performance - Part 4. Evaluation report content
3 Terms and Definitions
GB/T 30241.1-2013, GB 3836.1-2010, GB 3836.4-2010, GB/T 17212, GB/T 17614.1, […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30241.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 30241.1-2013 — Zener diode safety barrier—Part 1: General technical specification
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 30241.2-2013
$165.00