GB/T 30118-2013Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods (English PDF)
声表面波(SAW)器件用单晶晶片规范与测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30118-2013 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
August 28, 2026
Implementation date
March 1, 2027
Scope
GB/T 30118-2013 is the English-translated version of 声表面波(SAW)器件用单晶晶片规范与测量方法.
GB/T 30118-2013 is the Chinese standard "Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods". It was issued by State Administration for Market Regulation; Standardization Administration of China. Issued on 2026-08-28, in force from 2027-03-01.
Found what you need?
Document preview — GB/T 30118-2013
National Standard of the People's Republic of China
- ICS
- 31.140
- Classification
- L21
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 1.2 Purpose
- 1.3 Related documents
- 1.4 Information to be given in a detail specification
- 1.5 Details to be specified
- 2 Normative references
- 2.1 Environmental conditions
- 2.2 Test equipment
- 2.3 Gas discharge
- 2.4 Electron-beam/focus and deflection Note
- 2.5 8 valve noise
- 2.6 Voltage, current, and power
- 2.7 Voltage, current and power than the general performance and parameters
- 2.8 Characteristics and working conditions
- 3 Terms and definitions
- 3.1 Photocathode sensitivity
- 3.2 Equivalent background illuminance
- 3.3 Luminance gain or radiation gain
- 3.4 Reverse working voltage
- 3.5 Uniformity of output luminance
- 3.6 Limit working voltage
- 3.7 Input current
- 3.8 Modulation transfer function
- 4 Test and measurement procedures
- 4.1 Overview
- 5.1 Interface plug-in box size
- 5.2 Test Principle
- 5.3 Test System
- 5.4 Test Preparation
- 5.5 Test Procedure 3
- 6 Puller handle for plug-in interface Size
- 6.1 Plug-in interface Size
- 6.2 Handle locking function
- 7 Interface dimensions for subracks and plug-in electromagnetic shielding structure
- 7.1 For an electromagnetic shield structure into me connection size
- 7.2 Panel (plugin) interface Size
- 7.4 Test Procedure 5
- 8 Subracks and plug-in encoding key system
- 8.1 General
- 9 PCB Mounting B-type plug handle plug connection size
1 Foreword
GB/T 30118-2013 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 August 2026 and has been in force since 1 March 2027.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
GB/T 30118-2013 falls under ICS 31.140, in the field of electronics.
This catalogue holds 1,274 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Sector: National Standard (Recommended)
Issued by: State Administration for Market Regulation; Standardization Administration of China
English translation: about 15 pages (approximate)
4 Related standards
Other editions:
GB/T 30118-2026 (later edition)
Standards on related subjects:
GB/T 29197-2012 — Copper-clad aluminum wire
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
GB/T 43024.3-2026 — Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods
GB/T 43024.1-2026 — Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
5 Classification and status
International classification (ICS): 31.140
Chinese Standard Classification (CCS): L 21
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 30118-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30118-2013
$465.00