GB/T 30098-2013Laboratory magnetic driven autoclave (English PDF)
实验室用磁力驱动反应釜
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30098-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
May 1, 2014
Scope
GB/T 30098-2013 is the English-translated version of 实验室用磁力驱动反应釜.
GB/T 30098-2013 is the Chinese standard "Laboratory magnetic driven autoclave". Its scope clause reads: This standard specifies the laboratory reactor with magnetic drive terminology and definitions, product structure, the basic parameters, requirements, test methods, inspection Rules, marking, packaging, transportation and storage.
This standard applies to a volume of not more than 24L, the design pressure of not more than 35MPa, the design temperature range of the allowable temperature according to the material really Given laboratory magnetic drive reactor (hereinafter referred to as experimental tank).
This standard applies to non-ferrous metal manufacturing carbon steel, low alloy steel, stainless steel and titanium and titanium alloys, nickel and nickel alloys, zirconium, tantalum and other real Mortem kettle.
This standard does not apply to non-metallic materials manufacturing experiments kettle, pot experiment with direct flame heating and pressure may occur during operation Surge, the reaction speed of detonation test vessel. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30098-2013
National Standard of the People's Republic of China
- ICS
- 71.120.10
- Classification
- N 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Product Structure
- 5 basic parameters
- 8 Inspection Rules
- 9 signs, packaging, transportation and storage
1 Scope
This standard specifies the laboratory reactor with magnetic drive terminology and definitions, product structure, the basic parameters, requirements, test methods, inspection
Rules, marking, packaging, transportation and storage.
This standard applies to a volume of not more than 24L, the design pressure of not more than 35MPa, the design temperature range of the allowable temperature according to the material really
Given laboratory magnetic drive reactor (hereinafter referred to as experimental tank).
This standard applies to non-ferrous metal manufacturing carbon steel, low alloy steel, stainless steel and titanium and titanium alloys, nickel and nickel alloys, zirconium, tantalum and other real
Mortem kettle.
This standard does not apply to non-metallic materials manufacturing experiments kettle, pot experiment with direct flame heating and pressure may occur during operation
Surge, the reaction speed of detonation test vessel.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150.2-2011 pressure vessels - Part 2. Materials
JB/T 4711 Pressure vessel coated with transport packaging
Safety Technology Supervision TSGR0004-2009 Stationary Pressure Vessels
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Autoclave reactor
From the pressure vessel, heating and cooling devices and other components, and the stirring drive system, the chemical reaction can be completed at a temperature and pressure
Means.
3.2 Laboratory reactor
Capacity not exceeding 24L autoclave.
3.3 Magnetic drive reactor
Achieve a stirred reactor by magnetic coupling.
3.4 Kettle body autoclavebody
For containing chemical media and can withstand the temperature, the pressure vessel.
3.5 Kettle lid autoclavecover
Pressure vessel body and the open end of the connection member.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30098-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 30098-2013
$225.00