Valid

GB/T 30097-2013Thermal analyzer for molten cast iron (English PDF)

炉前铁液热分析仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30097-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 17, 2013

Implementation date

May 1, 2014

Scope

GB/T 30097-2013 is the English-translated version of 炉前铁液热分析仪.

GB/T 30097-2013 is the Chinese standard "Thermal analyzer for molten cast iron". Its scope clause reads: This standard specifies the molten iron blast furnace thermal analyzer terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transportation And storage.

This standard applies to the measurement of molten iron through the solidification temperature, subcooling, heat release characteristics and other parameters, on-line measurement of liquid iron metallurgy furnace state Before the liquid iron thermal analysis (referred to as Thermal Analyzer). Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 30097-2013

National Standard of the People's Republic of China

ICS
71.040.01
Classification
N 53

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the molten iron blast furnace thermal analyzer terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transportation

And storage.

This standard applies to the measurement of molten iron through the solidification temperature, subcooling, heat release characteristics and other parameters, on-line measurement of liquid iron metallurgy furnace state

Before the liquid iron thermal analysis (referred to as Thermal Analyzer).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)

GB/T 2881-2008 industrial silicon

GB 4208-2008 shell protection (IP code)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements

GB/T 5611-1998 term casting

GB/T 9971-2004 raw iron

GB/T 11606-2007 analytical instruments environmental test methods

GB/T 13384-2008 mechanical and electrical products packaging General technical conditions

GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test

JB/T 6214-1992 Instrument reliability verification test and measurement test (exponential distribution) Guidelines

YB/T 192-2001 steelmaking carburant

3 Terms and Definitions

GB/T 5611-1998 and defined the following terms and definitions apply to this document.

3.1

By measuring the solidification temperature of molten iron, subcooling, heat release and other parameters of the analyzer on-line measurement of liquid iron metallurgy states.

3.1.1 Blast furnace molten iron component thermal analyzer

Molten iron component having a thermal analyzer crystal measuring temperature, white eutectic temperature, activated carbon equivalent, activated carbon content of reactive silica content of early white

Volume, display and output functions.

3.1.2 Quality liquid iron blast furnace thermal analyzer

Liquid iron quality thermal analyzer with a solidification temperature curve, primary crystallization temperature, eutectic supercooling temperature, the eutectic temperature and then Hui, supercooling degree phase transition characteristics

Measured temperature, display, storage and output functions.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30097-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30097-2013

$205.00