GB/T 29917-2013Praseodymium-neodymium-dysprosium alloy (English PDF)
镨钕镝合金
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29917-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 27, 2013
Implementation date
August 1, 2014
Scope
GB/T 29917-2013 is the English-translated version of 镨钕镝合金.
GB/T 29917-2013 is the Chinese standard "Praseodymium-neodymium-dysprosium alloy". Its scope clause reads: This standard specifies requirements for dysprosium, praseodymium neodymium alloy, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate.
This standard applies to the production of electrolytic method for the production of neodymium praseodymium, neodymium and dysprosium alloy permanent magnet material used. Its clauses include requirements.
Found what you need?
Document preview — GB/T 29917-2013
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 Chemical composition
- 3.2 Appearance
1 Scope
This standard specifies requirements for dysprosium, praseodymium neodymium alloy, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate.
This standard applies to the production of electrolytic method for the production of neodymium praseodymium, neodymium and dysprosium alloy permanent magnet material used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 29656 praseodymium, neodymium and dysprosium alloys -
3 Requirements
3.1 Chemical composition
Praseodymium, neodymium and dysprosium alloys Grades chemical composition shall comply with the requirements in Table 1. Demand side, such products have special requirements, supply and demand sides can further
Consultations.
Table 1 product
Trademark
Chemical composition (mass fraction) /%
RE not less than
Nd /
RE Pr /
RE Dy /
RE Impurity content of not more than
RE Miscellaneous
Quality/RE Non-rare earth impurities
C Si Ca Al Mg Fe OW Mo Cl
045072A 99.5 72 ± 223 ± 2 5 ± 0.3 0.5 0.03 0.03 0.01 0.03 0.02 0.3 0.03 0.05 0.01
045072B 99.0 72 ± 223 ± 2 5 ± 0.3 1.0 0.05 0.05 0.02 0.05 0.03 0.3 0.05 0.08 0.01
045070A 99.5 70 ± 222 ± 2 8 ± 0.5 0.5 0.03 0.03 0.01 0.03 0.02 0.3 0.03 0.05 0.01
045070B 99.0 70 ± 222 ± 2 8 ± 0.5 1.0 0.05 0.05 0.02 0.05 0.03 0.3 0.05 0.08 0.01
045068A 99.5 68 ± 222 ± 210 ± 0.5 0.5 0.03 0.03 0.01 0.03 0.02 0.3 0.03 0.05 0.01
045068B 99.0 68 ± 222 ± 210 ± 0.5 1.0 0.05 0.05 0.02 0.05 0.03 0.3 0.05 0.08 0.01
Note 1. RE represents a rare earth element.
Note 2. The rare earth impurities include La, Ce, Sm, Eu, Gd, Tb, Ho, Er, Tm, Yb, Lu, Y.
3.2 Appearance
3.2.1
Products for the cast alloy.
3.2.2
Products and fracture surface showed a silver-white, should be clean, no visible inclusions and oxide powder off.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29917-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29917-2013
$85.00