Valid

GB/T 29883-2013Packaging for dangerous goods - Rigid plastics intermediate bulk containers - Methods of exposure to laboratory light sources (fluorescence UV lamp) (English PDF)

危险品包装 刚性塑料中型散装容器 实验室光源(荧光紫外灯)暴露法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29883-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 12, 2013

Implementation date

May 1, 2014

Scope

GB/T 29883-2013 is the English-translated version of 危险品包装 刚性塑料中型散装容器 实验室光源(荧光紫外灯)暴露法.

GB/T 29883-2013 is the Chinese standard "Packaging for dangerous goods - Rigid plastics intermediate bulk containers - Methods of exposure to laboratory light sources (fluorescence UV lamp)".

Its scope clause reads: This standard specifies the dangerous goods packaging rigid plastic IBCs condensed in the ultraviolet fluorescent UV exposure exposure test chamber Principles, general principles, equipment, samples, exposure conditions, test procedures and performance measurement sample after exposure.

This standard applies to fluorescent UV lamps to simulate a light source, exposure test for rigid plastics IBCs performed. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 29883-2013

National Standard of the People's Republic of China

Classification
A 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 UV exposure test condensing

1 Scope

This standard specifies the dangerous goods packaging rigid plastic IBCs condensed in the ultraviolet fluorescent UV exposure exposure test chamber

Principles, general principles, equipment, samples, exposure conditions, test procedures and performance measurement sample after exposure.

This standard applies to fluorescent UV lamps to simulate a light source, exposure test for rigid plastics IBCs performed.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB /1040.2 T Plastics Determination of tensile properties - Part 2. Test plastics molding and extrusion conditions

GB/T 2918 plastic sample conditioning and testing of the standard environment

GB 19434.8 dangerous goods safety inspection rigid plastic IBCs specification performance test

ISO 4892.1 Plastics exposure to laboratory light sources - Part 1. General (Plastics-Methodsofexposure tolaboratorylightsources-Part 1. generalguidance)

ISO 4892.3 Plastics exposure to laboratory light sources - Part 3. Fluorescent UV lamps (Plastics-Methodsofex- posuretolaboratorylightsources-Part 3. FluorescentUVlamps)

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 UV exposure test condensing

Ultraviolet fluorescent lamp as the light source, by simulating natural sunlight in the UV radiation and condensation, the product or material accelerated weathering resistance

Cyclical exposure test.

Principle 4

Rigid plastics intermediate bulk containers in the storage and transportation process, often long-term exposure to the open air, by the sun, rain, dew and other climatic conditions

The role of members, thus requiring rigid plastics intermediate bulk containers have a certain resistance to UV aging ability. Cutting parts of the force from the sample to be tested

Take samples, sample preparation method according to GB/T 1040.2 prescribed tensile test samples were prepared using fluorescent UV lamp as the light source, through a die

Quasi natural sunlight and rain, the material accelerated weathering test. After exposure the tensile properties of the test specimen, and in the same conditions

Measured at the same time clipping the tensile properties of unexposed test specimens, the test results before and after exposure were compared to assess the resistance of the material

Weatherability. Another agreement of the parties concerned, you can choose the overall exposure test, that the entire rigid plastic IBCs ultraviolet condensed storm

Lu test specimen overall performance was measured after the end of exposure.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29883-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29883-2013

$145.00