GB/T 29775-2013Pulps - Determination of fiber coarseness by automated optical analysis - Image analysis method (English PDF)
纸浆 纤维粗度的测定 图像分析法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29775-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 10, 2013
Implementation date
May 1, 2014
Scope
GB/T 29775-2013 is the English-translated version of 纸浆 纤维粗度的测定 图像分析法.
GB/T 29775-2013 is the Chinese standard "Pulps - Determination of fiber coarseness by automated optical analysis - Image analysis method". Its scope clause reads: This standard specifies the microscopic image analysis methods pulp fiber roughness measurement.
This standard applies to all kinds of pulp fibers measured roughness. Its clauses include terms and definitions; equipment and materials.
Found what you need?
Document preview — GB/T 29775-2013
National Standard of the People's Republic of China
- ICS
- 85.010
- Classification
- Y 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Equipment and Materials
1 Scope
This standard specifies the microscopic image analysis methods pulp fiber roughness measurement.
This standard applies to all kinds of pulp fibers measured roughness.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 462 paper, cardboard and moisture measurement sample pulps analysis
GB/T 22903 standard physical testing pulp water
GB/T 24324 Pulp physical testing laboratory sheets prepared by conventional sheet former method
GB/T 28218 Determination of pulp fiber length image analysis
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Fiber coarseness
Mass per unit length of the particular fiber (oven-dry), expressed in milligrams per meter (mg/m).
Principle 4
The fibers are uniformly distributed in a certain quality of a known range, the measurement range of the total length of all fibers with fiber analyzer,
Then draw fiber coarseness by calculation.
5 Equipment and Materials
Commonly used laboratory equipment and the following equipment and materials.
5.1 fiber analyzer
by the imaging system and the measuring system. Wherein the imaging system includes a microscope, digital imaging acquisition unit; measuring system
The system includes an image transmission and conversion unit, measurement analysis unit.
5.2 sheet forming device
should be consistent with GB/T 24324 requirements.
5.3 Balance
indexing is 0.1mg.
5.4
a glass filter.200mL porous disc, the pore diameter should be 15µm ~ 40µm.
5.5
jar.200mL.
5.6 filter
qualitative analysis filter paper, cut and shaped sheet-net area (shape) the same filter paper.
5.7 skin head straw
1mL graduated pipette.
5.8 tube
50mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29775-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29775-2013
$105.00