GB/T 29660-2013Determination of Chromium in cosmetics (English PDF)
化妆品中总铬含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29660-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 6, 2013
Implementation date
February 15, 2014
Scope
GB/T 29660-2013 is the English-translated version of 化妆品中总铬含量的测定.
GB/T 29660-2013 gives methods for measuring total chromium in cosmetics.
Clause 1 states that the standard specifies the determination of total chromium content by flame atomic absorption spectrophotometry and by inductively coupled plasma mass spectrometry, that it applies to the determination of total chromium in cosmetics, and that for a 1 g sample the flame atomic absorption method has a detection limit of 0.25 mg/kg and a quantification limit of 0.83 mg/kg while the inductively coupled plasma mass spectrometry method has a detection limit of 0.005 mg/kg and a quantification limit of 0.015 mg/kg.
Clause 3 is the first method, flame atomic absorption spectrophotometry, and is built as Principle, Reagents and materials, and instruments and equipment.
The principle given in 3.1 is that chromium is present as ions in the solution of the pretreated sample, that the atomized sample solution absorbs the chromium resonance line emitted by a chromium hollow cathode lamp in proportion to the chromium content of the sample, and that the result is quantified against a standard series with the other conditions held unchanged.
Subclause 3.2 calls for analytical grade reagents and water of the grade specified in GB/T 6682 and lists nitric acid, hydrogen peroxide, octanol, a national reference material of chromium in water at 0.100 g/L and a chromium standard solution at 10 mg/L prepared from it.
Subclause 3.3 lists an atomic absorption spectrophotometer with its accessories, a chromium hollow cathode lamp, a constant temperature water bath, a 25 mL stoppered cuvette and a 25 mL flask.
The draft breaks off at the end of 3.3, so the clause on the second, inductively coupled plasma mass spectrometry method is not shown. Clause 2 cites GB/T 6682.
The page gives the Chinese classification as Y42 and the international classification as 71.100.70, estimates the document at about 9,913 words and names no superseded edition; the standard was issued on 6 September 2013 and has applied since 15 February 2014.
Found what you need?
Document preview — GB/T 29660-2013
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 The first flame atomic absorption spectrophotometry
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China National Light Industry Council.
1 Scope
This standard specifies the flame atomic absorption spectrophotometric determination of total chromium content in cosmetics by Inductively Coupled Plasma Mass Spectrometry method.
This standard applies to the determination of total chromium in cosmetics. When the sample weight of 1g, the flame atomic absorption spectrophotometry for the detection limit 0.25mg/kg, limit of quantification was 0.83mg/kg; inductively coupled plasma mass spectrometry with a detection limit of 0.005mg/kg, the limit of quantification Of 0.015mg/kg.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6682 Analysis Laboratory use specifications and test methods
3 The first flame atomic absorption spectrophotometry
3.1 Principle
Samples were pretreated chromium is present in the form of ions in the sample solution, the sample solution is atomized chromium ion in the ground state atomic absorption of chromium Resonance line from chromium hollow cathode lamps emit, the absorbance is proportional to the chromium content in the sample. In other conditions remain unchanged, according to survey Spectral intensity of the amount absorbed, compared with standard series quantified.
3.2 Reagents and materials
Unless otherwise specified, reagents were of analytical grade. Water as a water GB/T 6682 regulations.
3.2.1 Nitric acid (rho20 = 1.42g/mL), pure class distinctions.
3.2.2 Nitrate (2.98 volume fraction). Take 20mL of nitric acid (3.2.1) added 980mL of water.
3.2.3 Hydrogen peroxide [w (H2O2) = 30%].
3.2.4 Octanol.
3.2.5 National standard chromium in water [rho (Cr) = 0.100g/L].
3.2.6 Chromium standard solution [rho (Cr) = 10mg/L]. Take the national standard substances in water chromium [rho (Cr) = 0.100g/L] 10.0mL placed 100mL volumetric flask, dilute to the mark with nitric acid (3.2.2).
3.3 Instruments and equipment
3.3.1 atomic absorption spectrophotometer and accessories.
3.3.2 Chromium hollow cathode lamp.
3.3.3 Constant temperature water bath.
3.3.4 Stoppered cuvette 25mL.
3.3.5 Flask 25mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 29660-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 29660-2013
$145.00