GB/T 29656-2013Chemical analysis methods for praseodymium neodymium dysprosium alloy (English PDF)
镨钕镝合金化学分析方法
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29656-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 6, 2013
Implementation date
May 1, 2014
Scope
GB/T 29656-2013 is the English-translated version of 镨钕镝合金化学分析方法.
GB/T 29656-2013 gives the chemical analysis methods for praseodymium neodymium dysprosium alloy, and clause 1 states that it specifies the determination of 39 components.
The same clause lists them: the total rare earth content, the praseodymium, neodymium and dysprosium contents, the distribution of the fifteen rare earth components, twelve rare earth impurities (lanthanum, cerium, samarium, europium, gadolinium, terbium, holmium, erbium, thulium, ytterbium, lutetium and yttrium), five non-rare-earth impurities (iron, silicon, aluminium, calcium and magnesium) and the carbon, oxygen and chlorine contents.
Each determination has its own clause and its own technique: clause 3 total rare earth by gravimetry, clause 4 praseodymium, neodymium and dysprosium by inductively coupled plasma atomic emission spectrometry, clause 5 the fifteen rare earth components by X-ray fluorescence spectrometry, clause 6 the rare earth impurities by ICP-AES as method one and by inductively coupled plasma mass spectrometry as method two, clause 7 the non-rare-earth impurities by ICP-AES, clause 8 carbon by the high frequency and infrared absorption method, clause 9 oxygen by the pulse infrared absorption method and clause 10 chlorine by silver nitrate turbidimetry.
Clause 2 sets the general rules that run through all of them: where two methods overlap in range, one serves for arbitration analysis; only recognised analytical reagents and distilled or deionised water, or water of equivalent purity, are used unless stated otherwise; and instruments must be within their verification period and meet the required technical parameters.
A warning placed before clause 1 states that the standard is for people with regular laboratory experience, that it does not point out every possible safety problem, and that the user is responsible for adopting appropriate safety and health practice and for complying with the relevant national regulations.
Clause 3 shows how a method is laid out: it fixes a determination range of 95.00% to 99.50% for total rare earth and describes the principle, which is dissolution of the sample in hydrochloric acid, fuming off of silicon, precipitation of the rare earths with ammonia to separate calcium and magnesium, redissolution and precipitation with oxalic acid, and ignition of the precipitate at 900 to 950 degrees Celsius to the oxide, which is brought to constant weight and weighed after cooling.
The standard is administered by the National Technical Committee on Rare Earth Standardization (SAC/TC229) and was drafted by the Baotou Research Institute of Rare Earths with the national quality supervision and inspection centre for rare earth products. It was issued on 2013-09-06 and has applied since 2014-05-01.
Found what you need?
Document preview — GB/T 29656-2013
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 General
- 3 Determination of total rare earth --- gravimetric method
- 4 Determination of praseodymium, neodymium, dysprosium amount --- inductively coupled plasma atomic emission spectrometry
- 15 REE determination of five components --- X-ray fluorescence spectrometry
- 7 non-rare earth impurities (iron, silicon, aluminum, calcium, magnesium) --- determination by inductively coupled plasma atomic emission spectrometry
- 8 Determination of the amount of carbon --- high frequency - infrared absorption method
- 10 Determination of chlorine content --- silver nitrate turbidimetry
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the method for determination of praseodymium, neodymium and dysprosium alloy 39 kinds of ingredients.
This standard applies to the total amount of praseodymium, neodymium and dysprosium alloys of rare earth, praseodymium, neodymium, dysprosium amount of 15 REE components, 12 kinds of rare earth impurities (lanthanum, Cerium, samarium, europium, gadolinium, terbium, holmium, erbium, thulium, ytterbium, lutetium, yttrium), 5 non-rare earth impurities (iron, silicon, aluminum, calcium, magnesium) and the amount of carbon, oxygen and chlorine Determination of the amount.
2 General
2.1 When a determination of two or more ingredients, the portion of two methods for the analysis of two overlapping ranges arbitration analysis.
2.2 Unless otherwise stated, the use of recognized analytical reagent only in the analysis; the water is distilled or deionized water or equivalent purity.
2.3 instruments shall be within the test cycle, the performance indicators should meet the technical parameters required for verification.
3 Determination of total rare earth --- gravimetric method
3.1 Determination of Range
Determination of total rare earth range 95.00% ~ 99.50%.
3.2 Principle
The sample is dissolved in hydrochloric acid, after the smoke off the silicon, rare earth precipitation with ammonia, separating calcium, magnesium and the like. After dissolving the precipitate with oxalic acid precipitate rare earth, will sink Lake at 900 °C ~ 950 °C burning into oxides, constant weight, weighing determination of rare earth after cooling.
3.3 Reagents and materials
3.3.1 Ammonium chloride.
3.3.2 hydrochloric acid (rho = 1.19g/mL).
3.3.3 Hydrochloric acid (11).
3.3.4 Hydrochloric acid (298).
3.3.5 Hydrogen peroxide (30%).
3.3.6 nitric acid (rho = 1.42g/mL).
3.3.7 perchloric acid (rho = 1.67g/mL).
3.3.8 ammonia water (rho = 0.90g/mL).
3.3.9 Ammonia (11).
3.3.10 Ammonium chloride solution (20g/L). 2g ammonium chloride (3.3.1) dissolved in 100mL of water [aqueous ammonia (3.3.9) the pH was adjusted to 9 ~ 10].
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29656-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29656-2013
$465.00