Valid

GB/T 29641-2013Poly(methyl methacrylate)(PMMA) cast noise barriers (English PDF)

浇铸型聚甲基丙烯酸甲酯声屏板

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29641-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 6, 2013

Implementation date

January 31, 2014

Scope

GB/T 29641-2013 is the English-translated version of 浇铸型聚甲基丙烯酸甲酯声屏板.

GB/T 29641-2013 is the Chinese standard "Poly(methyl methacrylate)(PMMA) cast noise barriers". Its scope clause reads: This standard specifies the terms and cast poly methyl methacrylate acoustic panel definitions, requirements, test methods, inspection rules, marks, packages Loading, transport and storage.

This standard applies to methyl methacrylate as raw material, cast in the form of bulk polymerization, non-embedded or embedded ribs poly A Acoustic panel methacrylate (hereinafter referred to as PMMA cast type sound panel). Its clauses include terms and definitions; requirements.

Found what you need?

Document preview — GB/T 29641-2013

National Standard of the People's Republic of China

ICS
83.080.20
Classification
G 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements

1 Scope

This standard specifies the terms and cast poly methyl methacrylate acoustic panel definitions, requirements, test methods, inspection rules, marks, packages

Loading, transport and storage.

This standard applies to methyl methacrylate as raw material, cast in the form of bulk polymerization, non-embedded or embedded ribs poly A

Acoustic panel methacrylate (hereinafter referred to as PMMA cast type sound panel).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB /1040.2 T Plastics Determination of tensile properties - Part 2. Test plastics molding and extrusion conditions

GB /Plastics - Determination of Charpy impact properties of T 1043.1 - Part 1. Non-instrumented impact test

Determination of GB/T 1633-2000 thermoplastics Vicat softening temperature (VST) of

Determination of GB/T 2410 transparent plastic light transmittance and haze

GB/T 2918 plastic sample conditioning and testing of the standard environment

GB/T 8624 Classification for burning behavior of building materials and products

GB/T 8626 Test Method for Flammability of building materials

Determination of GB/T 9341 plastic bending performance

GB/T 16422.2-1999 Plastics - Methods of exposure to laboratory light sources - Part 2. Xenon arc lamp

GB/T 19889.3 Acoustics Measurement of sound insulation buildings and building elements - Part 3. building elements Laboratory measurements of airborne sound insulation

Machining plastic sample preparation ISO 2818 (Plastics-Preparationoftestspecimensbymaching)

EN1794.2 road traffic noise noise reduction means non-acoustic performance - Part 2. General safety and environmental requirements (Roadtraffic noisereducingdevices-Non-acousticperformance-Part 2. Generalsafetyandenvironmentalrequire- ments)

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Stiffener Reinforcingrib

Polyamide and other raw materials, monofilament spun made for improving the impact strength of PMMA molding type of acoustic panel.

4 Requirements

4.1 Appearance

4.1.1 surface defects

PMMA type casting surface acoustic panel should be smooth. Acoustic panel should not be greater than 3mm2 spots, sink marks or other surface […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29641-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29641-2013

$210.00