Valid

GB/T 29640-2013Plastics - Glass fiber reinforced poly(decamethylene terephthalamide) compound (English PDF)

塑料 玻璃纤维增强聚对苯二甲酰癸二胺

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29640-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 6, 2013

Implementation date

January 31, 2014

Scope

GB/T 29640-2013 is the English-translated version of 塑料 玻璃纤维增强聚对苯二甲酰癸二胺.

GB/T 29640-2013 is the Chinese standard "Plastics - Glass fiber reinforced poly(decamethylene terephthalamide) compound".

Its scope clause reads: This standard specifies the glass fiber reinforced polyethylene terephthalamide decamethylene diamine Compound classification and naming, requirements, test methods, inspection rules, Signs, packaging, transportation and storage.

This standard applies to polyethylene terephthalamide decamethy resin matrix, glass fiber and (or) a flame retardant and (or) flame retardant synergist And other processing aids, glass fibers formed by melt blending reinforced polyethylene terephthalamide decamethy material qualities.

Poly terephthalamide dec Resin refers to a diamine and decamethylene diamine of terephthalic acid, or homopolymers with minor amounts of other monomers. This standard does not apply to non-glass fibers and other mineral fillers reinforced modified polyethylene terephthalamide decamethylene diamine material.

Found what you need?

Document preview — GB/T 29640-2013

National Standard of the People's Republic of China

ICS
83.080.20
Classification
G 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 2.1993, IDT)

1 Scope

This standard specifies the glass fiber reinforced polyethylene terephthalamide decamethylene diamine Compound classification and naming, requirements, test methods, inspection rules,

Signs, packaging, transportation and storage.

This standard applies to polyethylene terephthalamide decamethy resin matrix, glass fiber and (or) a flame retardant and (or) flame retardant synergist

And other processing aids, glass fibers formed by melt blending reinforced polyethylene terephthalamide decamethy material qualities. Poly terephthalamide dec

Resin refers to a diamine and decamethylene diamine of terephthalic acid, or homopolymers with minor amounts of other monomers.

This standard does not apply to non-glass fibers and other mineral fillers reinforced modified polyethylene terephthalamide decamethylene diamine material.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method (ISO 1183-1.2004, IDT)

GB/T 1034-2008 Plastics Determination of water absorption (ISO 62.2008, IDT)

GB /1040.2-2006 Plastics Determination of tensile properties T - Part 2. Test plastics molding and extrusion conditions (ISO 527-

2.1993, IDT)

GB/T 1408.1-2006 electrical insulating materials strength test methods - Part 1. Tests at power frequencies (IEC 60243-1.1998,

IDT)

GB/T 1634.2-2004 Determination of plastic deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite materials

Material (ISO 75-2.2003, IDT)

Determination of strength (ISO 180.2000, IDT) GB/T 1843-2008 plastic Izod impact

GB/T 1844.1-2008 Plastics - Symbols and abbreviated terms - Part 1. Basic polymers and their special characteristics (ISO 1043-1.

2001, IDT)

GB/T 1844.2-2008 Plastics - Symbols and abbreviations - Part 2. Fillers and reinforcing materials (ISO 1043-2.2000, IDT)

GB/T 1844.4-2008 Plastics - Symbols and abbreviated terms - Part 4. flame retardants (ISO 1043-4.1998, IDT)

GB/T 2408-2008 Plastics - Determination of burning behavior of horizontal and vertical (IEC 60695-11-10.1999, IDT)

GB/T 2547-2008 plastic sampling method

GB/T 2918-1998 standard plastic sample conditioning and environment testing (ISO 291.1997, IDT)

GB/T 4207-2012 solid insulating materials resistance to tracking index and comparative tracking index measurement method (IEC 60112. 1979,

IDT)

GB/T 8170 repair value expressed about the rules and limit values and judgment

GB/T 9341-2008 Plastics - Determination of flexural properties (ISO 178.2001, IDT)

GB/T 9345.4-2008 Plastics - Determination of ash - Part 4. polyamide (ISO 3451-4.1998, IDT)

GB/T 12006.1-2009 plastic polyamide - Part 1. Determination of viscosity number (ISO 307.2007, IDT)

GB/T 17037.1-1997 Preparation of injection molded thermoplastic material specimens - Part 1. General principles and multipurpose specimens and long

Article prepared sample (idt ISO 294-1.1996) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29640-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29640-2013

$195.00