GB/T 29618.5120-2021Field device tool (FDT) interface specification - Part 5120: Communication implementation for common object model - IEC 61784 CPF 2 (English PDF)
现场设备工具(FDT)接口规范 第5120部分:通用对象模型的通信实现 IEC 61784 CPF 2
This is a limited preview
Buy now to download the full PDF (74 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29618.5120-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 29618.5120-2021 is the English-translated version of 现场设备工具(FDT)接口规范 第5120部分:通用对象模型的通信实现 IEC 61784 CPF 2.
GB/T 29618.5120-2021 is the Chinese standard "Field device tool (FDT) interface specification - Part 5120: Communication implementation for common object model - IEC 61784 CPF 2".
Its scope clause reads: This document provides an implementation method for integrating CIP technology into the COM-based FDT interface specification (IEC /T R62453-41).
Communication profile family 2 (CIPTM) defines type 2 based on IEC 61158-2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, The communication profile of IEC 61158-6-2 and IEC 62026-3.CP2/1 (Con- trolNetTM), CP2/2 (EtherNet/IPTM) and CP2/3 (DEVICENET) basic profile.
Reference [15] also defines Other CIP-based communication profiles (CompoNet). This document specifies the implementation of communications and other services based on IEC 62453-302. This document neither contains the FDT specification, nor does it modify it.
Found what you need?
Document preview — GB/T 29618.5120-2021
National Standard of the People's Republic of China
- Classification
- N 10
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, abbreviations and conventions
- 3.1 Terms and definitions
- 3.2 Symbols and abbreviations
- 3.3 Convention
- 4 Bus category
- 5 Access instance and device data
- 6 Protocol specific behavior
- 7 Protocol-specific usage of common data types
- 8 Protocol-specific general data types
- 8.1 Common data type---DTMCIPDataTypeSchema
- 8.2 Ethernet/IP data type---DTMEIPDataTypeSchema
- 9 Network management data type
- 9.1 Overview
- 9.2 Node address
- 9.3 Scanner/Master-Bus Parameter Set (CIP)---FDTCIPDTMParameterSchema
- 10 Communication data type
- 11 Channel parameter data type
- 12 Device identification
- 12.1 Device type identification data type ---FDTCIPIdentSchema
- 12.2 Topology scan data type
- 12.3 Device type identification data type---FDTCIPScanIdentSchema
- 12.4 Device type identification data type ---FDTCIPDeviceTypeIdentSchema
- Appendix A (informative) Implementation Tips
1 Scope
This document provides an implementation method for integrating CIP technology into the COM-based FDT interface specification (IEC /T R62453-41).
Communication profile family 2 (CIPTM) defines type 2 based on IEC 61158-2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2,
The communication profile of IEC 61158-6-2 and IEC 62026-3.CP2/1 (Con- trolNetTM), CP2/2 (EtherNet/IPTM) and CP2/3 (DEVICENET) basic profile. Reference [15] also defines
Other CIP-based communication profiles (CompoNet).
This document specifies the implementation of communications and other services based on IEC 62453-302.
This document neither contains the FDT specification, nor does it modify it.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
IEC 61158-2 Industrial Communication Network Fieldbus Specification Part 2.Physical Layer Specification and Service Definition (Industrialcom- municationnetworks-Fieldbusspecifications-Part 2.Physicallayerspecificationandservicedefini- tion)
IEC 61158-3-2 Industrial Communication Network Fieldbus Specification Part 3-2.Data Link Layer Service Definition Type 2 Components (Industrialcommunicationnetworks-Fieldbusspecifications-Part 3-2.Data-linklayerservicedefi- nition-Type2elements)
IEC 61158-4-2 Industrial Communication Network Fieldbus Specification Part 4-2.Data Link Layer Protocol Specification Type 2 Element (In- dustrialcommunicationnetworks-Fieldbusspecifications-Part 4-2.Data-linklayerprotocolspecifi- cation-Type2elements)
IEC 61158-5-2 Industrial Communication Network Fieldbus Specification Part 5-2.Application Layer Service Definition Type 2 Component (In- dustrialcommunicationnetworks-Fieldbusspecifications-Part 5-2.Applicationlayerservicedefini- tion-Type2elements)
IEC 61158-6-2 Industrial Communication Network Fieldbus Specification Part 6-2.Application Layer Protocol Specification Type 2 Element (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-2.Applicationlayerprotocol specification-Type2elements)
IEC 61784-1 Industrial communication network profile Part 1.Fieldbus profile (Industrialcommunicationnet- works-Profiles-Part 1.Fieldbusprofiles)
IEC 61784-2 Industrial Communication Network Overview Part 2.Additional Fieldbus Profiles Real-time network based on ISO /
IEC 8802-3(Industrialcommunicationnetworks-Profiles-Part 2.Additionalfieldbusprofilesfor
GB/T 33009.2 | GB/T 33009.1 | GB/T 33008.1 | GB/T 29618.3032 | GB/T 29618.3031 | GB/T 29618.309 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 74 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 61158 · IEC 61784 · IEC 8802
How to Download GB/T 29618.5120-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29618.5215-2018 — Field device tool (FDT) interface specification -- Part 5215: Communication implementation for common language infrastructure -- IEC 61784 CPF 15
GB/T 29618.5110-2021 — Field device tool (FDT) interface specification - Part 5110: Communication implementation for common object model - IEC 61784 CPF 1
GB/T 29618.5231-2018 — Field device tool (FDT) interface specification -- Part 5231: Communication implementation for common language infrastructure -- IEC 61784 CP 3/1 and CP 3/2
GB/T 29618.5120-2021
$575.00