GB/T 29618.5110-2021Field device tool (FDT) interface specification - Part 5110: Communication implementation for common object model - IEC 61784 CPF 1 (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"

Drafting.

This document is part 5110 of GB/T 29618 "Field Device Tool (FDT) Interface Specification". GB/T 29618 has been released

The following parts.

---Part 1.Overview and guidelines;

---Part 2.Concept and detailed description;

---Part 301.Communication profile integration FF fieldbus specification;

---Part 302.Communication profile integration general industrial protocol;

---Part 306.Communication profile integration INTERBUS fieldbus specification;

---Part 309.Communication profile integration addressable remote sensor high-speed channel;

---Part 315.Communication profile integration MODBUS fieldbus specification;

---Part 41.Object model profile integration general object model;

---Part 42.Object model profile integration common language infrastructure;

---Part 515.Communication realization of general object model MODBUS fieldbus specification;

---Part 5110.Communication implementation of general object model IEC 61784CPF1;

---Part 5120.Communication implementation of the common object model IEC 61784CPF2;

---Part 5231.Communication implementation of common language infrastructure IEC 61784CP3/1 and CP3/2;

---Part 5232.Communication implementation of common language infrastructure IEC 61784CP3/4, CP3/5 and CP3/6;

---Part 529.Communication implementation of common language infrastructure IEC 61784CPF9;

---Part 5215.Communication implementation of common language infrastructure IEC 61784CPF15;

---Part 61.Device Type Manager Style Guide for General Object Model;

---Part 62.Field Device Tool (FDT) Style Guide.

The translation method used in this document is equivalent to IEC /T R62453-51-10.2017 "Field Device Tool (FDT) Interface Specification No. 51-10

Part. Communication Implementation of Common Object Model IEC 61784CPF1".

The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows.

---GB/T 29618.1-2017 Field Device Tool (FDT) Interface Specification Part 1.Overview and Guidelines (IEC 62453-1.

2016, IDT)

---GB/T 29618.2-2017 Field Device Tool (FDT) Interface Specification Part 2.Concept and detailed description

(IEC 62453-2.2016, IDT)

---GB/T 29618.41-2013 Field Device Tool (FDT) Interface Specification Part 41.Object Model Profile Integration Communication

Use object model (IEC 62453-41.2009, IDT)

---GB/T 29618.301-2015 Field Device Tool (FDT) Interface Specification Part 301.Communication Profile Integration FF

Fieldbus specification (IEC 62453-301.2009, IDT)

The following editorial changes have been made to this document.

---The name of this standard is changed to "Field Device Tool (FDT) Interface Specification Part 5110.Communication Implementation of General Object Model

IEC 61784CPF1";

--- Deleted documents not cited in the text in Chapter 2.IEC 61784-1.2014 Industrialcommunication

networks-Profiles-Part 1.Fieldbusprofiles;

---According to the content of the main text, the IEC /T R62453-41.2016 in Chapter 2 is revised to IEC /T R62453-41, IEC 62453-

301.2009/AMD1.2016 was revised to IEC 62453-301.

Introduction

This document is an interface specification for the FDT group for functional control and data access in a client/server architecture

Software developer. This document is the analysis result and design process of the standard interface development, which aims to promote servers and clients developed by different manufacturers

Seamless interoperability between terminals.

Integrating the fieldbus into the control system needs to complete some other tasks. In addition to fieldbus and device-specific tools,

It is necessary to integrate other tools into higher-level, system-wide planning or engineering tools. In particular, for the expansion and heterogeneous

For the use in control systems, especially in the process industry, the clear definition of engineering interfaces makes it easy for all participants to use.

Very important.

Device Type Manager (DTM, DeviceTypeManager) is a device-specific software component. DTM soft

The parts and equipment are provided to the user together. The DTM is integrated into the engineering tool through the FDT interface defined in the specification. Usually, the integration

The method is open to all fieldbuses, so it meets the requirements of integrating different types of equipment in heterogeneous control systems.

Figure 1 shows the location of this document in the GB/T 29618 series structure.

Figure 1 This part of GB/T 29618

GB/T 29618 aims to provide interface specifications for field device tools (FDT), which is to be composed of the following parts.

---Part 1.Overview and guidelines. The purpose is to specify the overview and guidelines of the GB/T 29618 series, including.

* Explain the structure and content of GB/T 29618 series;

* Provide some instructions that are commonly used in other parts of the GB/T 29618 series;

* Describe the relationship with other parts of GB/T 29618.

---Part 2.Concept and detailed description. The purpose is to explain the general principles of the field device tool concept, and to specify the general

The interaction between images, common object behaviors, and common objects.

---Part 41.Object model profile integration general object model. The purpose is to define a general purpose based on MSCOM technology

The realization of FDT principle includes object behavior and object interaction through COM interface.

---Part 42.Object model profile integration common language infrastructure. The purpose is to define communication based on Microsoft.NET technology

The realization with FDT principle includes the object behavior and object interaction realized through the.NET interface.

---Part 5110.Communication implementation of the common object model IEC 61784CPF1.The purpose is to provide the foundation

Wire (FF) technology is integrated into the implementation method of COM-based FDT interface specification (IEC /T R62453-41).

---Part 5120.Communication implementation of the common object model IEC 61784CPF2.The purpose is to provide the integration of CIP technology

To the implementation method of COM-based FDT interface specification (IEC /T R62453-41).

---Part 5131.Communication implementation of general object model IEC 61784CP3/1 and CP3/2.The purpose is to provide

Field bus technology is integrated into the implementation method of COM-based FDT interface specification (IEC /T R62453-41).

---Part 5132.Communication realization of the general object model IEC 61784CP3/4, CP3/5 and CP3/6.The purpose is

Provide the implementation of integrating PROFINET technology into the COM-based FDT interface specification (IEC /T R62453-41)

method.

---Part 5160.Common Object Model Communication Implementation IEC 61784CPF6.The purpose is to provide the INTERBUS technology

Technology is integrated into the implementation method of COM-based FDT interface specification (IEC /T R62453-41).

---Part 5190.Communication implementation of the common object model IEC 61784CPF9.The purpose is to provide a collection of HART technology

To achieve the COM-based FDT interface specification (IEC /T R62453-41).

---Part 5115.Communication implementation of the common object model IEC 61784CPF15.The purpose is to provide the Modbus technology

Integrated into the implementation method of COM-based FDT interface specification (IEC /T R62453-41).

---Part 5231.Communication implementation of common language infrastructure IEC 61784CP3/1 and CP3/2.The purpose is to provide

Integrate fieldbus technology into the FDT interface specification (GB/T 29618.42) based on the information realized by CLI, and stipulate that it is based on

Communication implementation and other services of IEC 62453303-1.

---Part 5232.Communication implementation of common language infrastructure IEC 61784CP3/4, CP3/5 and CP3/6.Aim at

To provide information based on the CLI implementation of the PROFINET technology integrated into the FDT interface specification (GB/T 29618.42),

It also specifies communication implementation and other services based on IEC 62453-303-2.

---Part 5290.Communication implementation of common language infrastructure IEC 61784CPF9.The purpose is to provide HART technology

It is integrated into the information based on the CLI implementation in the FDT interface specification (GB/T 29618.42), and specifies the information based on GB/T 29618.309

Implementation of communications and other services.

---Part 5215.Communication implementation of common language infrastructure IEC 61784CPF15.The purpose is to provide

Modbus technology is integrated into the FDT interface specification (GB/T 29618.42) based on the information realized by CLI, and stipulates that it is based on

Implementation of GB/T 29618-315 communication and other services.

---Part 61.Device Type Manager Style Guide for General Object Model. The purpose is to propose the user interface of the device DTM

And some guidelines and specifications for the realization of functions.

---Part 62.Field Device Tool (FDT) Common Language Infrastructure Style Guide. The purpose is to explain the CLI based (general

Language framework) to implement DTM and the guidelines and guidelines for the application part of the framework related to the user interface and behavior.

---Part 301.Communication profile integration IEC 61784CPF1.The purpose is to provide foundation fieldbus (FF) technology

Information integrated into the FDT interface specification (GB/T 29618.2), and specifies communication and other services.

---Part 302.Communication profile integration IEC 61784CPF2.The purpose is to provide the integration of CIP technology into the FDT interface

Standards (GB/T 29618.2) information, and stipulates communications and other services.

---Part 303-1.Communication profile integration IEC 61784CP3/1 and CP3/2.The purpose is to provide fieldbus technology

Information integrated into the FDT interface specification (GB/T 29618.2), and specifies communication and other services.

---Part 303-2.Communication profile integration IEC 61784CP3/4, CP3/5 and CP3/6.The purpose is to provide

PROFINET is integrated into the information of the FDT interface specification (GB/T 29618.2), and specifies communication and other services.

---Part 306.Communication profile integration IEC 61784CPF6.The purpose is to provide the integration of INTERBUS technology into

FDT interface specification (GB/T 29618.2) information, and stipulates communication and other services.

---Part 309.Communication profile integration IEC 61784CPF9.The purpose is to provide integration of HART technology into FDT interface

The information of the port specification (GB/T 29618.2), and specifies communications and other services.

---Part 315.Communication profile integration IEC 61784CPF15.The purpose is to provide a combination of ModbusTCP and Modbus

SerialLine technology is integrated into the information of the FDT interface specification (GB/T 29618.2), and specifies communication and other services.

Field Device Tool (FDT) Interface Specification

Part 5110.Communication Implementation of General Object Model

IEC 61784CPF1

1 Scope

This document provides additional integration of the Foundation Fieldbus (FF) protocol into the COM-based FDT specification (IEC /T R62453-41)

This document describes communication definitions, protocol-specific extensions, and the representation of blocks (such as transmitter blocks, resource blocks, or function blocks).

The protocol-specific definition is based on the H1 and HSE protocols of the FF specification. In addition, these definitions contain the system for FF device configuration

Information required.

The scope of this document is limited to the specific definitions of FOUNDATION fieldbus devices and systems.

This document specifies the implementation of communications and other services based on IEC 62453-301.

This document neither contains the FDT specification, nor does it modify it.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations

Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

This document.

IEC 62453-1.2016 Field Device Tool (FDT) Interface Specification Part 1.Overview and Guidelines (Fielddevicetool

(FDT)interfacespecification-Part 1.Overviewandguidance]

IEC 62453-2.2016 Field Device Tool (FDT) Interface Specification Part 2.Concept and detailed description [Fielddevicetool

(FDT)interfacespecification-Part 2.Conceptsanddetaileddescription]

IEC /T R62453-41 Field Device Tool (FDT) Interface Specification Part 41.Object Model Integration General Principles General Object Model

Type [Fielddevicetool(FDT)interfacespecification-Part 41.ObjectModelIntegrationprofile-Com-

monobjectmodel]

IEC 62453-301 Field Device Tool (FDT) Interface Specification Part 301.Communication General Principles Integration IEC 61784CPF1

[Fielddevicetool(FDT)interfacespecification-Part 301.Communicationprofileintegration-

IEC 61784CPF1]

3 Terms, definitions, symbols, abbreviations and conventions