Valid

GB/T 29611-2013Rubber, raw - Determination of the glass transition temperature - Differential scanning calorimetry (DSC) (English PDF)

生橡胶 玻璃化转变温度的测定 差示扫描量热法(DSC)

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29611-2013 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

January 1, 2013

Implementation date

January 1, 2013

Scope

GB/T 29611-2013 is the English-translated version of 生橡胶 玻璃化转变温度的测定 差示扫描量热法(DSC).

GB/T 29611-2013 - This standard specifies the raw rubber glass transition temperature (Tg) determined by the method with a differential scanning calorimeter (DSC).

This standard applies to the determination of the temperature of raw rubber glass transition.

Found what you need?

Document preview — GB/T 29611-2013

National Standard of the People's Republic of China

ICS
83.060

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard uses the translation method identical with ISO 22768:2006 "raw rubber with differential scanning calorimetry (DSC) determination of the glass transition temperature".

Correspondence between the consistency of the standards of international documents and normative references of the following documents.

--- GB/T 2941-2006 rubber physical test method for preparing and conditioning General procedures (ISO 23529:2004, IDT)

--- GB/T 14838-2009 determine Rubber and rubber products precision test method standards (ISO/T R9272.2005, IDT) the standard proposed by China Petroleum and Chemical Industry Association.

This standard by the national Common test methods for rubber and rubber goods Technical Committee of Standardization Technical Committee (SAC/TC35/SC2) Centralized.

This standard was drafted. CE Rubber Co., Ltd. tournament round, Shanghai Double Coin tire company, Shandong Linglong tires Limited, China Research Institute of Dushanzi Petrochemical Company Limited Oil and Gas, Beijing Rubber Industry Research and Design Institute.

1 Scope

This standard specifies the raw rubber glass transition temperature (Tg) determined by the method with a differential scanning calorimeter (DSC).

This standard applies to the determination of the temperature of raw rubber glass transition.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 19466.1-2004 plastic differential scanning calorimetry (DSC) - Part 1. General (ISO 11357-1:1997, IDT) ISO/T R9272 Rubber and rubber products - Determination of precision for test method standards (Rubberandrubberproducts-Determinationofprecisionfortestmethodstandards) ISO 23529 rubber physical test method for sample preparation and conditioning General Procedure (Rubber-Generalproceduresfor preparingandconditioningtestpiecesforphysicaltestmethods)

3 Terms and Definitions

GB/T 19466.1-2004 and as defined in the following terms and definitions apply to this document.

The glass transition Glass and reversible transition between a high elastic state of amorphous polymers or amorphous regions of semi-crystalline polymers.

The glass transition temperature Tg the approximate midpoint of the temperature of the glass transition temperature range.

Note. This standard is defined as the glass transition temperature by a temperature rise rate of 20 °C/min to obtain a DSC curve turning point.

Principle 4

In an atmosphere and a predetermined temperature control program, enthalpy measured by DSC rubber variation with temperature, determined by the resulting curve the glass transition temperature.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 29611-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29611-2013

$105.00