GB/T 29600-2012Technical specification of the temperature & humidity control system for the mobile laboratory (English PDF)
移动实验室用温湿度控制系统技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29600-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 31, 2013
Scope
GB/T 29600-2012 is the English-translated version of 移动实验室用温湿度控制系统技术规范.
GB/T 29600-2012 is the Chinese standard "Technical specification of the temperature & humidity control system for the mobile laboratory". Its scope clause reads: This standard specifies the terms and definitions mobile laboratory temperature and humidity control system, technical requirements, test methods.
This standard applies to all types of general technical conditions land mobile laboratory temperature and humidity control system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29600-2012
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- K 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 4.1 Basic requirements
- 4.2 Special Requirements
- 5.1 Basic requirements for inspection
- 5.2 Special Requirements
1 Scope
This standard specifies the terms and definitions mobile laboratory temperature and humidity control system, technical requirements, test methods.
This standard applies to all types of general technical conditions land mobile laboratory temperature and humidity control system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Particular requirements GB 4706.32-2012 household and similar electrical appliances - Safety heat pumps, air conditioners and dehumidifiers
GB 19489-2008 General requirements for laboratory biosafety
GB 50346-2004 biological safety laboratory construction technical specifications
GB 50591-2010 clean room construction and acceptance
GJB150.8A-2009 military Laboratory environmental test methods - Part 8 rain test
GJB150.10A-2009 military equipment Laboratory environmental test methods Part 10 test mold
GJB150.11A-2009 military equipment Laboratory environmental test methods Part 11 salt spray test
GJB150.12A-2009 military equipment Laboratory environmental test methods Part 12 sand and dust testing
GJB150.16A-2009 military Laboratory environmental test methods - Part 16 Vibration Test
QC/T 252-2009 Special Purpose Vehicle approval test procedures
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 The indoor unit indoorunit
Installed in the mobile equipment inside the laboratory, control devices and ancillary facilities.
3.2 Outdoor unit
Installed in the mobile device outside the laboratory, control devices and ancillary facilities.
4. Technical Requirements
4.1 Basic requirements
4.1.1 Operating Environment
And storage system should work under the following circumstances.
a) Temperature. Operating. -45 °C ~ 55 °C, Storage. -55 °C ~ 70 °C;
b) Relative humidity 10% to 95%.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29600-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29600-2012
$145.00