GB/T 29501-2013Thermal insulation painted glass (English PDF)
隔热涂膜玻璃
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29501-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 7, 2013
Implementation date
December 1, 2013
Scope
GB/T 29501-2013 is the English-translated version of 隔热涂膜玻璃.
GB/T 29501-2013 is the Chinese standard "Thermal insulation painted glass". Its scope clause reads: This standard specifies the terms and definitions of the insulating glass coating, classification and marking, materials, requirements, test methods, inspection rules, marks, packages Loading, transport and storage.
This standard applies to the use of transparent insulation coating were having the ability to block solar heat from the glass surface coating preparation. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29501-2013
National Standard of the People's Republic of China
- ICS
- 81.040.30
- Classification
- Q 34
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Burning rate
- 3.2 Sagging runs
1 Scope
This standard specifies the terms and definitions of the insulating glass coating, classification and marking, materials, requirements, test methods, inspection rules, marks, packages
Loading, transport and storage.
This standard applies to the use of transparent insulation coating were having the ability to block solar heat from the glass surface coating preparation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1733-1993 Determination of water resistance of the film
GB/T 1766 Paints and varnish coating aging rating method
GB/T 2680 architectural glass visible light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and have
Parameters measured off windowpane
GB/T 5206.5 Paints and varnishes - Vocabulary - Part 5 of coatings and films term sick
GB/T 6739 Determination of film hardness by pencil test paints and varnishes
GB/T 8170 repair value expressed about the rules and limit values and judgment
9274-1988 Determination of GB/T Paints and varnishes resistance to liquids
Cut test GB/T 9286 Paints and varnishes
GB/T 18915.1-2002 coated glass - Part 1. solar control coated glass
GB/T 23987-2009 Paints and varnish coating artificial climate aging exposure exposed to fluorescent UV and water
HG/T 4104-2009 construction of water fluorine coating
JC846-2007 filmed glass
JG/T 338 architectural glass insulation coating
3 Terms and Definitions
GB/T 5206.5 and define the following terms and definitions apply to this document.
3.1 Burning rate
The ratio of the distance of time spent away from combustion and combustion.
Note. The units in mm/min.
3.2 Sagging runs
When the coating is applied in a vertical plane, between the coating applied to the cured coating sag resistance due to the poor or improper construction, such as the original film thicker
Resulting in uneven coating due to various area shapes wet film flows down forming a thick edge.
3.3
The film is directly exposed to heat can cause damage to its glass coating outside environment.
NOTE. glass insulation coating the first surface and the fourth surface coating applied to the surface of the plate glass or laminated glass face any exposed metal coating type insulating glass.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29501-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29501-2013
$195.00