Valid

GB/T 29493.8-2013Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 8: Determination of residual monomers in polyacrylate (English PDF)

纺织染整助剂中有害物质的测定 第8部分:聚丙烯酸酯类产品中残留单体的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29493.8-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 19, 2013

Implementation date

December 1, 2013

Scope

GB/T 29493.8-2013 is the English-translated version of 纺织染整助剂中有害物质的测定 第8部分:聚丙烯酸酯类产品中残留单体的测定.

GB/T 29493.8-2013 is the Chinese standard "Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 8: Determination of residual monomers in polyacrylate".

Its scope clause reads: GB/T 29493 provisions of this part of the measurement method of textile dyeing and finishing auxiliaries polyacrylate product residual monomers.

This section applies to the determination of the residual monomer content of the polyacrylate coating finishing agents, adhesives and other products. Its clauses include reagents and solutions.

Found what you need?

Document preview — GB/T 29493.8-2013

National Standard of the People's Republic of China

ICS
71.100.40
Classification
G 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 4 Reagents and solutions
  • 4.2 bromate - potassium bromide solution, c (16KBrO3

1 Scope

GB/T 29493 provisions of this part of the measurement method of textile dyeing and finishing auxiliaries polyacrylate product residual monomers.

This section applies to the determination of the residual monomer content of the polyacrylate coating finishing agents, adhesives and other products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Preparation of GB/T 601-2002 Chemical Reagent standard titration solution

GB/T 603-2002 Chemical Reagent Test Methods - Preparations with

GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)

GB/T 8170-2008 revised value represents about rules and limit values and judgment

Principle 3

An excess of potassium bromate in the sample solution - a solution of potassium bromide, potassium bromide and potassium bromate reaction of bromine in acidic medium with the sample

Double bond reaction was. After completion of the reaction, an excess of potassium iodide and reduction of unreacted bromine iodine generated, and finally with sodium thiosulfate

Precipitation titration standard solution of iodine.

KBrO3 5KBr 6HCl ->

3Br2 6KCl 3H2O

CH -2 CHCOOR Br2 ->

CH2BrCHBrCOOR

Br2 2KI ->

2KBr I2

I2 2Na2S2O3 ->

Na2S4O6 2NaI

4 Reagents and solutions

Unless otherwise specified, use only recognized as analytical reagents and GB/T 6682-2008 specified in the third grade water.

4.1

CTC.

4.2 bromate - potassium bromide solution, c (16KBrO3

) = 0.05mol/L. Weigh 1.5g 12.5g of potassium bromide and potassium bromate in 200mL burn

Cup, add water to dissolve and transferred to 1000mL volumetric flask, dilute to the mark, shake, stored in a brown bottle and set aside.

4.3

sodium lauryl sulfate solution, 2% (mass fraction).

4.4

potassium iodide solution, 10% (mass fraction).

4.5

hydrochloric acid solution, 11 (volume ratio).

4.6

sodium thiosulfate standard solution, c (Na2S2O3) = 0.1mol/L. preparation and calibration in accordance with the provisions of GB/T 601-2002 in.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 29493.8-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29493.8-2013

$85.00