GB/T 29493.6-2013Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 6: Determination of isocyanate groups in polyurethane prepolymers (English PDF)
纺织染整助剂中有害物质的测定 第6部分:聚氨酯预聚物中异氰酸酯基含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29493.6-2013 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Level / Type
National · Recommended
Issue date
July 19, 2013
Implementation date
December 1, 2013
Scope
GB/T 29493.6-2013 is the English-translated version of 纺织染整助剂中有害物质的测定 第6部分:聚氨酯预聚物中异氰酸酯基含量的测定.
GB/T 29493.6-2013 — GB/T 29493 provisions of this part of the textile dyeing and finishing auxiliaries polyurethane prepolymer isocyanate ester group content determination.
This section applies to the toluene diisocyanate (TDI), methylene diphenyl diisocyanate (MDI) and other diisocyanate monomer synthesis Polyurethane prepolymer isocyanate ester group content determination.
Found what you need?
Document preview — GB/T 29493.6-2013
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- G 70
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 4 Reagents and solutions
- 4.1 toluene, dried calcium sulfate and filtered.
- 4.2 ethanol.
- 5 Apparatus
- 5.1 electronic balance, a sense of the amount of 0.0001g.
Foreword
GB/T 29493 "textile dyeing and finishing auxiliaries of harmful substances Determination" is divided into nine sections.
--- Part 1. Determination of polybrominated biphenyls and polybrominated diphenyl ethers by gas chromatography - mass spectrometry;
--- Part 2. perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) High performance liquid chromatography - mass
Spectroscopy;
--- Part 3. organotin compounds by gas chromatography - mass spectrometry;
--- Part 4. polycyclic aromatic compounds (PAHs) by gas chromatography - mass spectrometry;
--- Part 5. Determination of the formaldehyde content of the emulsion polymer free;
--- Part 6. polyurethane prepolymer isocyanate determination of the ester group content;
--- Part 7. polyurethane coating finishing agent diisocyanate determination ester monomer;
--- Part 8. Determination of acrylic products in the residual monomers;
--- Part 9. Determination of acrylamide.
This is Part 6 GB/T 29493 of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted Law Amendment uses ISO 11909.2007 "Paints and varnishes polyurethane resin binder Common test
method".
This part of ISO 11909.2007, compared with more adjustment in the structure, listed in Appendix A of this standard and ISO 11909.2007
The reg number control list.
This part of ISO 11909.2007 technical differences exist compared to the terms of these differences has been involved through its outer margin bits
Opposed to a single vertical line (|) have been marked, in Appendix B gives the corresponding list of technical differences and their causes.
This section also made the following editorial changes.
--- Use the "standard" instead of "this International Standard";
--- Deleted international standards foreword.
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Standardization Technical Committee of dye auxiliaries Technical Committee (SAC/TC134/SC1) centralized.
This section is drafted. Biography of Hangzhou Fine Chemical Co., Ltd. Zhejiang Chuan, Donghua University.
1 Scope
GB/T 29493 provisions of this part of the textile dyeing and finishing auxiliaries polyurethane prepolymer isocyanate ester group content determination.
This section applies to the toluene diisocyanate (TDI), methylene diphenyl diisocyanate (MDI) and other diisocyanate monomer synthesis
Polyurethane prepolymer isocyanate ester group content determination.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of GB/T 601-2002 Chemical Reagent standard titration solution
GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)
GB/T 8170-2008 revised value represents about rules and limit values and judgment
Principle 3
Urethane prepolymer with an excess of di-n-butylamine. An excess of di-n-butylamine with hydrochloric acid standard solution titration to do bromophenol blue indicator
Display the titration end point. Reaction is as follows.
R-NCO (C4H9) 2NH ->
RNHCON (C4H9) 2
(C4H9) 2NH HCl ->
(C4H9) 2NH . HCl
4 Reagents and solutions
Unless otherwise specified, use water only confirm three analytical grade reagents and GB/T 6682 stipulated.
4.1 toluene, dried calcium sulfate and filtered.
4.2 ethanol.
4.3 di-n-butylamine solution, c [(C4H9) 2NH] = 2.0mol/L or 0.2mol/L. Weigh 6.5g or 65g redistilled anhydrous di-n-butyl
Amine, (when 1.033kPa, a boiling point of 157 degrees C ~ 162 degrees C), diluted with anhydrous toluene to 250mL, and mix.
4.4 hydrochloric acid standard solution, c (HCl) = 1mol/L or 0.1mol/L. according to GB/T 601-2002 requirements Preparation and calibration.
4.5 bromophenol blue indicator. Weigh 1g of bromophenol blue in a mortar, add 1.5mL concentration of 1mol/NaOH solution of finely L, then
Added 20mL of ethanol and 10mL of water to dissolve.
5 Apparatus
5.1 electronic balance, a sense of the amount of 0.0001g.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601-2002Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 8170-2008Rules of rounding off for numerical values & expression and judgement of limiting values
ISO 3696
How to Download GB/T 29493.6-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 29493.7-2013 — Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 7: Determination of monomeric diisocyanate in polyurethane coating agent
Secure payment via Stripe
Payments accepted
GB/T 29493.6-2013
$135.00