GB/T 29417-2012Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete (English PDF)
水泥砂浆和混凝土干燥收缩开裂性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29417-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
August 1, 2013
Scope
GB/T 29417-2012 is the English-translated version of 水泥砂浆和混凝土干燥收缩开裂性能试验方法.
GB/T 29417-2012 is the Chinese standard "Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete". Its scope clause reads: This standard specifies the cement mortar, concrete drying shrinkage and stress cracking resistance test methods.
This standard applies to the determination of the laboratory result calculated by drying shrinkage stress cracking cement mortar and concrete reference index. Its clauses include principle of the method; terms and definitions; equipment.
Found what you need?
Document preview — GB/T 29417-2012
National Standard of the People's Republic of China
- ICS
- 91.100.30
- Classification
- Q 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 PRINCIPLE OF THE METHOD
- 4 Terms and Definitions
- 5 Equipment
1 Scope
This standard specifies the cement mortar, concrete drying shrinkage and stress cracking resistance test methods.
This standard applies to the determination of the laboratory result calculated by drying shrinkage stress cracking cement mortar and concrete reference index.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17671 cement mortar strength test method (ISO method)
GB/T 50081 mechanical properties of ordinary concrete test method standards
GB/T 50082 ordinary concrete long-term performance and durability test method standards
3 PRINCIPLE OF THE METHOD
The method is to use longer than the measured length to limit the amount of change in the pouring cement mortar or concrete Specimen expansion and contraction means.
According to the principle of action and reaction are equal, and the amount of change in terms of length measurement of drying shrinkage of cement mortar or concrete should
Strength, splitting tensile strength ratio of the percentage of its drying shrinkage stress using a predetermined period represented age cracking index.
4 Terms and Definitions
The following terms and definitions apply to this document.
4.1 Drying shrinkage stress
Cement mortar or concrete due to drying shrinkage tensile stress generated under constraints.
4.2 Expansion stress
Cement mortar or concrete compressive stress due to volume expansion produced under constraints.
4.3 Cracking Index (dryingshrinkage)
Characterization of the possibility of cracking in the cement mortar or concrete drying shrinkage conditions, drying shrinkage stress in the same test age and Splitting
Tensile strength ratio expressed as a percentage.
5 Equipment
5.1 tryout
Cement drying shrinkage stress test body and splitting tensile strength test specimen are used prism triple test mode, test mode for the cross-sectional dimension […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29417-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29417-2012
$145.00