GB/T 29299-2012General specification of semiconductor laser rangefinder (English PDF)
半导体激光测距仪通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29299-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29299-2012 is the English-translated version of 半导体激光测距仪通用技术条件.
GB/T 29299-2012 is the Chinese standard "General specification of semiconductor laser rangefinder". Its scope clause reads: This standard specifies the requirements of the semiconductor laser rangefinder, test methods, inspection rules, packaging, transport and identification and so on.
This standard applies to the semiconductor laser ranging instrument category. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29299-2012
National Standard of the People's Republic of China
- ICS
- 31.260
- Classification
- L 51
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requires
- 4.1 Technical Requirements
- 4.2 Performance Requirements
- 4.3 Environmental Adaptability Requirement
- 4.4 4 reliability requirements
- 5.1 Technical Requirements Test
- 5.2 Performance requirements, test
- 5.3 Environmental Adaptability Test Requirements
- 5.4 reliability test
- 6 7 inspection rules
- 6.1 General rules
- 6.2 Identification of test
- 6.3 Type inspection
- 6.4 factory inspection
- 6.5 Test Project
- 6.6 sampling plan and pass or fail judgment
- 7 packing, transportation, sign
- 7.1 Packaging
- 7.2 Transport
- 7.3 mark
1 Scope
This standard specifies the requirements of the semiconductor laser rangefinder, test methods, inspection rules, packaging, transport and identification and so on.
This standard applies to the semiconductor laser ranging instrument category.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4857.5 packaging transport package drop test methods
Frequency sinusoidal vibration test method. GB/T 4857.10 Transport packages - Basic test - Part 10
GB/T 5080.1 Reliability Testing - Part 1. Test conditions and statistical test principles
GB 7247.1 Safety of laser products - Part 1. Equipment Classification, Requirements and User's Guide
Electrical safety GB/T 10320 laser equipment and facilities
GB/T 12085.2 and optical instruments - Environmental test methods - Part 2. Low temperature, heat, humidity
GB/T 12085.7 and optical instruments - Environmental test methods - Part 7. drip, rain
GB/T 12085.11 Optics and optical instruments - Environmental test methods - Part 11. mildew
GB/T 13384 mechanical and electrical products packaging General technical conditions
Identification of GB/T 13739 laser beam widths, divergence angle and test methods transverse mode
GB/T 15313 Laser term
3 Terms and Definitions
GB 7247.1 and GB/T 15313 and defined by the following terms and definitions apply to this document.
3.1 Laser rangefinder
With a laser as a light source for optical instruments target ranging.
3.2 Laser rangefinder
Semiconductor laser as a light source of a laser range finder.
3.3 Maximum range
Under specified atmospheric conditions, when a predetermined target reaches a predetermined distance measured quasi-rate, a semiconductor laser rangefinder that can be detected as far distance.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 41209-2021General specifications for laser rangefinder for lunar and planetary exploration
- JY/T 0619-2019Equipping standard of education equipment for physics in junior middle schools
- JY/T 0621-2019Equipping standard of education equipment for biology in junior middle schools
- JY/T 0622-2019Equipping standard of education equipment for geography in junior middle schools
- JY/T 0600-2017Equipment specifications for the major of agricultural and rural water in vocational schools
- JY/T 0601-2017Equipment specifications for the major of hydraulic engineering in vocational colleges
Similar standards
How to Download GB/T 29299-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29299-2012
$195.00