GB/T 29238-2012The parameter and measurement of energy saving for the mobile equipment (English PDF)
移动终端设备节能参数和测试方法
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29238-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29238-2012 is the English-translated version of 移动终端设备节能参数和测试方法.
GB/T 29238-2012 is the Chinese standard "The parameter and measurement of energy saving for the mobile equipment". Its scope clause reads: This standard specifies the mobile terminal device in standby, calls, data and other business applications, business applications and functions of power parameters And test methods.
This standard applies to mobile communications handsets, including standard single GSM (GPRS)/CDMA/WCDMA/T D-SCDMA, etc. Mode, dual-mode mobile terminal, does not apply to business and industry-specific applications. Its clauses include terms, definitions and abbreviations.
Found what you need?
Document preview — GB/T 29238-2012
National Standard of the People's Republic of China
- ICS
- 33.060.20
- Classification
- M 37
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 terms, definitions and abbreviations
- 3 2 Overview
- 4 Standby power test
- 4.1 Test Objective
- 4.2 Test Conditions
- 4.3 Test Method
- 5 Call power test
- 5.1 Test object
- 5.2 Test Conditions
- 5.3 Test Method
- 6 domain data packet transmission power test
- 6.1 test purposes
- 6.2 Test Conditions
- 6.3 Test Method
- 7 Other services and features 20 power test
- 7.1 test purposes
- 7.2 Test Conditions
- 7.3 Test Method
- Appendix A (informative) Test Environment
- Annex B (informative) each standard working frequency
- References
1 Scope
This standard specifies the mobile terminal device in standby, calls, data and other business applications, business applications and functions of power parameters
And test methods.
This standard applies to mobile communications handsets, including standard single GSM (GPRS)/CDMA/WCDMA/T D-SCDMA, etc.
Mode, dual-mode mobile terminal, does not apply to business and industry-specific applications.
2 terms, definitions and abbreviations
2.1 Terms and Definitions
The following terms and definitions apply to this document.
2.1.1 Rated capacity
Manufacturers indicate battery capacity refers to the battery at an ambient temperature of 20 °C ± 5 °C conditions, the rate of discharge to the termination voltage 5h when should
Provide electricity, with C5 expressed in units of Ah (ampere hour) or mAh (milliamp hours).
2.2 Acronyms
The following abbreviations apply to this document.
AMR. Adaptive Multi-Rate (AdaptiveMultiRate)
ADC. A/D converter (Analog-to-DigitalConverter)
BA. BCCH channel allocation (BCCHalocation)
BCCH. Broadcast Control Channel (BroadcastControlChannel)
BCH. Broadcast Channel (BroadcastChannel)
CCCH-PCH. Public channel - paging channel (CommonControlChannel-PagingChannel))
CDG. CDMA Development Group (CodeDivisionMultipleAccessDevelopmentGroup)
CDMA. Code Division Multiple Access (CodeDivisionMultipleAccess)
CPICH. Common Pilot Channel (CommonPilotChannel)
DPCH. dedicated physical channel (DedicatedPhysicalchannel)
DRX. Discontinuous Reception (DiscontinuousReceive)
DTX. discontinuous transmission (DiscontinuousTransmission)
FTAP. Forward Test Application Protocol (ForwardTestApplicationProtocl)
GPRS. General Packet Radio Service (GeneralPacketRadioService)
GSM. Global System for Mobile Communications (GlobalSystemforMobileCommunications)
HRPD. High Rate Packet Data (HighRatePacketData)
MMS. Multimedia Messaging Service (MultimediaMessageService)
MS; mobile station (MobileStation) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29238-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29238-2012
$435.00