GB/T 2910.25-2017Textiles -- Quantitative chemical analysis -- Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform) (English PDF)
纺织品 定量化学分析 第25部分:聚酯纤维与某些其他纤维的混合物(三氯乙酸/三氯甲烷法)
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 2910.25-2017 in 30 minutes.
Issued by
AQSIQ; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 2910.25-2017 is the English-translated version of 纺织品 定量化学分析 第25部分:聚酯纤维与某些其他纤维的混合物(三氯乙酸/三氯甲烷法).
GB/T 2910.25-2017 — This Part of GB/T 2910 stipulates the method for determination of polyester fiber content of the bi-component mixture of polyester fiber and cellulose fiber (cotton, flax, ramie, viscose fiber, modal fiber, lyocell fiber, cupro ammonia fiber), animal hair fiber (wool, cashmere, etc.), synthetic fiber (polyacrylonitrile fiber, aramid fiber), after removal of non-fiber substances, by the trichloroacetic acid and chloroform method. This Part applies to mixtures of polyester fibers and certain other fibers.
Found what you need?
Document preview — GB/T 2910.25-2017
National Standard of the People's Republic of China
Issued by: AQSIQ; SAC
Contents
- Foreword...3
- 1 Scope...6
- 2 Normative references...6
- 3 Principles...6
- 4 Reagents...7
- 5 Devices...7
- 6 Test steps...7
- 7 Calculation and presentation of results...8
- 8 Precision...8
- References...9
Foreword
GB/T 2910 "Textiles - Quantitative chemical analysis" contains the following parts:
- Part 1: General principles of testing;
- Part 2: Ternary fiber mixture;
- Part 3: Mixtures of acetate and certain other fibers (method using acetone);
- Part 4: Mixtures of certain protein and certain other fibers (method using
hypochlorite);
- Part 5: Mixtures of viscose, cupro or modal and cotton fibers (method using sodium
zincate);
- Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton
fibers (method using formic acid and zinc chloride);
- Part 7: Mixtures of polyamide and certain other fibers (method using formic acid);
- Part 8: Mixtures of acetate and triacetate fibers (method using acetone);
- Part 9: Mixtures of acetate and triacetate fibers (method using benzyl alcohol);
- Part 10: Mixtures of triacetate or polylactide and certain other fibers (method using
dichloromethane);
- Part 11: Mixtures of cellulose and polyester fibers (method using sulfuric acid);
- Part 12: Part 12: Mixtures of acrylic, certain modacrylics, certain chloro-fibers,
certain elastane fibers with certain other fibers (method using dimethylformamide);
- Part 13: Mixtures of certain chloro-fibers and certain other fibers(method using
carbon disulfide/acetone);
- Part 14: Mixtures of acetate and certain chloro-fibers (method using acetic acid);
- Part 15: Mixtures of jute and certain animal fibers (method by determining nitrogen
content);
- Part 16: Mixtures of polypropylene and certain other fibers (method using xylene);
- Part 17: Mixtures of chloro-fibers (homopolymers of vinyl chloride)and certain
other fibers(method using sulfuric acid);
- Part 18: Mixtures of silk and wool or hair (method using sulfuric acid);
Textiles - Quantitative chemical analysis - Part 25: Mixtures
of polyester and certain other fibers (method using
trichloroacetic acid and chloroform)
Caution - Persons using this Part shall have practical experience in formal
laboratory work. This Part does not address all possible security issues. It is the
user's responsibility to take appropriate safety and health measures and ensure
compliance with the conditions stipulated by the relevant national laws and
regulations.
1 Scope
This Part of GB/T 2910 stipulates the method for determination of polyester fiber
content of the bi-component mixture of polyester fiber and cellulose fiber (cotton, flax,
ramie, viscose fiber, modal fiber, lyocell fiber, cupro ammonia fiber), animal hair fiber
(wool, cashmere, etc.), synthetic fiber (polyacrylonitrile fiber, aramid fiber), after
removal of non-fiber substances, by the trichloroacetic acid and chloroform method.
This Part applies to mixtures of polyester fibers and certain other fibers.
2 Normative references
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document;
for the undated documents, only the latest version (including all the amendments) is
applicable to this standard.
GB/T 2910.1 Textiles - Quantitative chemical analysis - Part 1: General principles of
testing (GB/T 2910.1-2009, ISO 1833-1:2006, IDT)
3 Principles
Dissolve and remove polyester fibers from a mixture of known dry mass, using
trichloroacetic acid/chloroform solution. Collect the residue. Rinse, dry and weigh it.
Use the corrected mass, to calculate the percentage of the dry mass of the mixture. The
mass percentage of polyester fiber is obtained from the difference.
4 Reagents
Use the reagents specified in GB/T 2910.1 and 4.1, 4.2 and 4.3 of this Part.
4.1 Trichloroacetic acid/chloroform solution: Prepare trichloroacetic acid and
chloroform, in a mass ratio of 1:1.
Safety warning: This reagent is harmful to the human body, so proper protective
measures shall be taken when using it.
4.2 Trichloroacetic acid/chloroform lotion: Add chloroform to 15 g of trichloroacetic
acid, until reaching 100 g.
4.3 Chloroform.
5 Devices
Use the equipment specified in GB/T 2910.1 and 5.1 of this Part.
5.1 Conical flask: The capacity is not less than 200 mL, with a glass stopper.
6 Test steps
Follow the general procedures specified in GB/T 2910.1. Then follow the steps below.
6.1 Put the specimen into the conical flask.
6.2 Add 50 mL of trichloroacetic acid/chloroform solution (4.1), to each gram of
specimen.
6.3 Cover the glass stopper. Shake the conical flask vigorously.
6.4 Place the conical flask containing the specimen for 15 min. Shake it from time to
time.
6.5 Pour the liquid into a glass sand core crucible. Drain the liquid by suction.
6.6 Pour 100 mL of trichloroacetic acid/chloroform solution (4.1) into the conical flask.
Then pour the liquid into a glass sand core crucible. Then use trichloroacetic
acid/chloroform washing solution (4.2) and chloroform (4.3), to wash all the residues
in the conical flask into a glass sand core crucible.
6.7 For each cleaning, the liquid shall be drained by gravity first, then drained by suction.
6.8 Finally, dry the glass sand core crucible and its residue. Cool it down. Weigh it.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2910.1Textiles -- Quantitative chemical analysis -- Part 1: General principles of testing
- GB/T 2910.1-2009Textiles -- Quantitative chemical analysis -- Part 1: General principles of testing
ISO 1833
Cited by
- GB/T 45512-2025Textiles — Quantitative chemical analysis — Mixtures of polybenzimidazole fiber with certain other fibers
- GB/T 45514-2025Textiles — Quantitative chemical analysis — Mixtures of polyarylate with certain other fibers
- FZ/T 01161-2022Textiles - Quantitative chemical analysis - Mixtures of copper-modified polyacrylonitrile fibers with certain other fibers
How to Download GB/T 2910.25-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2910.1-2009 — Textiles -- Quantitative chemical analysis -- Part 1: General principles of testing
GB/T 2910.26-2017 — Textiles -- Qualitative chemical analysis -- Part 26: Mixtures of melamine and cotton or aramide fibers (method using hot formic acid)
GB/T 2910.24-2009 — Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane)
GB/T 2910.25-2017
$85.00