GB/T 29094-2012Temper designations for copper and copper alloys (English PDF)
铜及铜合金状态表示方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29094-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
October 1, 2013
Scope
GB/T 29094-2012 is the English-translated version of 铜及铜合金状态表示方法.
GB/T 29094-2012 is the Chinese standard "Temper designations for copper and copper alloys". Its scope clause reads: This Standard specifies the basic principles and methods for temper designations for copper and copper alloys.
This Standard applies to copper and copper alloy products. Its clauses include basic principles; temper designations. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on DECEMBER 31, 2012 and took effect on OCTOBER 1, 2013.
Found what you need?
Document preview — GB/T 29094-2012
National Standard of the People's Republic of China
- ICS
- 77.150.30
- Classification
- H 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Basic principles4
- 3 Temper designations4
- Annex A (Informative) Cross references between new and old temper codes13
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard modifies and adopts the United States ASTM B601-2009, Standard classification for temper designations for copper and copper alloys - wrought and cast.
The difference between this Standard and ASTM B601-2009, Standard classification for temper designations for copper and copper alloys - wrought and cast, are as follows.
-- in M tempers (as manufactured tempers), M08 (as low-pressure cast) is added in this Standard than the ASTM standard;
-- in OS tempers (annealed tempers, with grain size prescribed), OS030 temper (with nominal average grain size 0.30 mm) is added in this Standard than in the ASTM standard;
-- in TD tempers (solution heat-treated + cold-worked), TD08 temper (solution heat-treated and cold-worked to spring) is added in this Standard than in the ASTM standard;
-- in TH tempers (solution heat-treated + cold-worked + precipitation hardened), TH08 temper (spring + precipitation hardened) is added in this Standard than in the ASTM standard.
1 Scope
This Standard specifies the basic principles and methods for temper designations for copper and copper alloys. This Standard applies to copper and copper alloy products.
2 Basic principles
2.1 Temper designations for copper and copper alloys are classified into three classes.
2.2 The first-class temper is expressed using a capitalized English letter, representing the basic production mode of products.
2.3 One Arabic numeral or one capitalized English letter, added after the first-class temper, expresses the second-class temper, representing the functions or specific production process of products.
3 Temper designations
3.1 Designations for the first-class tempers
3.1.1 M -- as-manufactured tempers
Applicable to tempers produced in the product by the primary manufacturing operations of casting or hot working.
3.2 Designations for the second- and third-class tempers
3.2.1 Designations for the second- and third-class tempers of as-manufactured tempers (M)
The designations for the second- and third-class tempers of as-manufactured tempers shall be as specified in Table 1.
3.2.2 Designations for the second- and third-class tempers of cold-worked
tempers (H)
3.2.4 Designations for the second- and third-class tempers of heat-treated
tempers (T)
The designations for the second- and third-class tempers of heat-treated tempers (T) shall be as specified in Table 7. […]
Annex A (Informative) Cross references between new and old temper codes
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29094-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29094-2012
$125.00