GB/T 29058-2012Building industrial machine safety technical requirements - General principles (English PDF)
墙材工业机械安全技术要求 总则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29058-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
September 1, 2013
Scope
GB/T 29058-2012 is the English-translated version of 墙材工业机械安全技术要求 总则.
GB/T 29058-2012 is the Chinese standard "Building industrial machine safety technical requirements - General principles". Its scope clause reads: This standard specifies MATERIALS General industrial machinery in the design, manufacture, installation, use, maintenance and other technical aspects of safety requirements.
This standard applies to industrial machinery MATERIALS (hereinafter referred to as mechanical). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29058-2012
National Standard of the People's Republic of China
- ICS
- 91.100.01
- Classification
- Q 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
1 Scope
This standard specifies MATERIALS General industrial machinery in the design, manufacture, installation, use, maintenance and other technical aspects of safety requirements.
This standard applies to industrial machinery MATERIALS (hereinafter referred to as mechanical).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB 2894-2008 Guidelines for the use and safety signs
GB/T 3766-2001 Hydraulic System General technical conditions
GB 4053.1-2009 fixed ladders and platforms - Safety requirements - Part 1. Steel ladders
GB 4053.2-2009 fixed ladders and platforms - Safety requirements - Part 2. Steel LADDER GB 4053.3-2009 fixed ladders and platforms - Safety requirements - Part 3. Industrial guardrails and steel platform
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 5817-2009 dust workplace hazard degree
GB/T 7932-2003 General technical conditions of pneumatic systems
GB 9078-1996 industrial furnace air pollutant emission standards
GB/T 9969-2008 General Industrial Product Manual
GB 12265.3-1997 Safety of machinery to avoid crushing of parts of the human body minimum spacing
GB/T 13306 signs
GB/T 13325-1991 basic norms noise operator position noise measurement of radiation machinery and equipment (engineering grade)
GB/T 15706.1-2007 Safety of machinery - Basic concepts, general principles for design - Part 1. Basic terminology, methodology
GB/T 15706.2-2007 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles
GB 16754-2008 Safety of machinery - Emergency stop design principles
GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design
GB/T 17248.3-1999 Acoustics machinery and equipment noise emission and other operating position emission sound pressure levels specified location
Measuring method in situ
GB 19517-2009 National Electrical Safety Equipment Technical Specifications
GB 23821-2009 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs
3 Terms and Definitions
Terms and definitions GB/T 15706.1-2007 defined in this document apply.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29058-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29058-2012
$145.00