GB/T 28985-2012Wood I-jiost for building structures (English PDF)
建筑结构用木工字梁
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28985-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 28985-2012 is the English-translated version of 建筑结构用木工字梁.
GB/T 28985-2012 is the Chinese standard "Wood I-jiost for building structures". Its scope clause reads: This standard specifies the terms and definitions structural carpentry word beam, requirements, test methods, quality control, instructions and signs, Labeling and packaging.
This standard applies to building structure carpentry beam. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28985-2012
National Standard of the People's Republic of China
- ICS
- 91.080.20
- Classification
- P 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4.1 Configuration
- 4.2 material
- 4.3 Dimensions and tolerances
- 4.4 The basic mechanical properties of
- 4.5 The main mechanical properties of eigenvalues 5
- 5.1 Size and deviation detection
- 5.2 The basic mechanical properties testing
- 5.3 The main mechanical properties testing
- 6 Quality Control
- 6.1 Inspection classification
- 6.2 factory inspection
- 6.3 Type inspection
- 6.4 Sampling methods and decision rules
- 7 Instructions
- 8 Marking, labeling and packaging
- Appendix A (normative) Performance Testing Technical Regulations
- Appendix B (normative) characteristic value of the coefficient
- Annex C (normative) flange axial tensile strength characteristic value (Ft) Test Method
- Annex D (informative) the actual use of the relevant technical details
- References
1 Scope
This standard specifies the terms and definitions structural carpentry word beam, requirements, test methods, quality control, instructions and signs,
Labeling and packaging.
This standard applies to building structure carpentry beam.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB/T 18259 artificial board and surface decoration term
GB/T 20241 LVL GB/T 22349 wooden structure covered with plywood boards
GB 50005 design of timber structures
GB 50206 Construction Quality Acceptance of Timber Structure Engineering
GB/T 50329 standard test methods for wood structures
LY/T 1580 OSB
3 Terms and Definitions
And the following terms and definitions GB/T 18259 and GB 50005 apply to this document defined.
3.1 Building Construction Timber Beams woodI-joistforbuildingstructures
Lumber or structural composite lumber for flange, wood-based structural panels for the web, bearing structural member with structural adhesive bonding (see
FIG. 1), also known as word joists.
1 word schematic diagram joists […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28985-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28985-2012
$435.00