GB/T 28898-2012Evaluation of uncertainty in chemical composition analysis for metallurgical materials (English PDF)
冶金材料化学成分分析测量不确定度评定
This is a limited preview
Buy now to download the full PDF (75 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28898-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 5, 2012
Implementation date
May 1, 2013
Scope
GB/T 28898-2012 is the English-translated version of 冶金材料化学成分分析测量不确定度评定.
GB/T 28898-2012 is the Chinese standard "Evaluation of uncertainty in chemical composition analysis for metallurgical materials".
Its scope clause reads: This standard specifies the chemical composition analysis Measurement Uncertainty universal norms and gravimetric method, titration, spectrophotometry, atomic Absorption spectrometry, hydride generation - atomic fluorescence spectrometry, inductively coupled plasma atomic emission spectrometry, spark discharge atomic emission spectrometry , X-ray fluorescence spectrometry, infrared absorption and thermal conductivity method, the determination of carbon content Uncertainty evaluation method of measuring gas volumetric method.
This standard applies to the metallurgical analysis of chemical composition of Measurement Uncertainty. Its clauses include general.
Found what you need?
Document preview — GB/T 28898-2012
National Standard of the People's Republic of China
- ICS
- 77.080.01
- Classification
- H 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 1 General Provisions
- 3.1 Analysis of common test uncertainty factor
- 3.3 Measurement Uncertainty Several issues should be noted that
- 3.4 Evaluation of analysis and testing of components in the main uncertainty
- 4 Weight Measurement Uncertainty Evaluation
- 4.1 Analysis and measurement parameters describe
- 4.2 mathematical model
- 4.3 Identification of uncertainty sources
- 4.5 Evaluation of combined standard uncertainty of
- 4.6 Evaluation of expanded uncertainty of
- 4.7 Measurement results and the Expression of Uncertainty
- 5 Titration Measurement Uncertainty
- 5.1 Analysis and measurement parameters Description
- 5.2 mathematical model
- 5.3 identify sources of uncertainty
- 5.4 Evaluation of uncertainty components
- 5.5 Evaluation of combined standard uncertainty of
- 5.6 Evaluation of expanded uncertainty of
- 5.7 Results and Expression of Uncertainty
- 6 spectrophotometry Measurement Uncertainty
- 6.1 Analysis and measurement parameters describe
- 6.2 mathematical model
- 6.3 Identification of uncertainty sources
- 6.4 Evaluation of Uncertainty
- 6.5 Evaluation of combined standard uncertainty of
- 6.6 Evaluation of expanded uncertainty of
- 6.7 Measurement results and the Expression of Uncertainty
- 7 Atomic Absorption Spectrometry Measurement Uncertainty
- 7.1 Analysis and measurement parameters describe
- 7.2 mathematical model
- 7.3 Identification of uncertainty sources
- 7.5 Evaluation of combined standard uncertainty of
- 7.6 Evaluation of expanded uncertainty of
- 7.7 Measurement results and the Expression of Uncertainty
- 8 Hydride Generation - Atomic Fluorescence Spectrometry Measurement Uncertainty
- 8.1 Analysis and measurement parameters describe
- 8.2 mathematical model
- 8.3 Identification of uncertainty sources
- 8.4 Evaluation of uncertainty components
- 8.5 Evaluation of combined standard uncertainty of
- 8.6 Evaluation of expanded uncertainty of
- 8.7 Measurement results and the Expression of Uncertainty
- 9 inductively coupled plasma atomic emission spectrometry Measurement Uncertainty
- 9.1 Analysis and measurement parameters Description
- 9.2 mathematical model
- 9.3 Identification of uncertainty sources
- 9.4 Evaluation of uncertainty components
- 9.5 Evaluation of combined standard uncertainty of
- 9.6 Evaluation of expanded uncertainty
- 9.7 Measurement results and the Expression of Uncertainty
- 10 spark discharge atomic emission spectrometry Measurement Uncertainty
- 10.1 Analysis and measurement parameters describe
- 10.2 mathematical model
- 10.4 Uncertainty components Evaluation
- 10.6 Evaluation of expanded uncertainty
- 10.7 Expression of Uncertainty in Measurement results and
- 11 X-ray fluorescence spectrometry Measurement Uncertainty
- 11.1 Analysis and measurement parameters describe
- 11.2 mathematical model
- 11.4 Uncertainty components Evaluation
- 11.6 Evaluation of expanded uncertainty
- 11.7 Expression of Uncertainty in Measurement results and
- 12 infrared absorption method and thermal conductivity measurement Uncertainty Evaluation
- 12.1 Analysis and measurement parameters describe
- 12.2 mathematical model
- 12.4 Uncertainty components Evaluation
- 12.6 Evaluation of expanded uncertainty
- 12.7 Expression of Uncertainty in Measurement results and
- 13.1 Analysis and measurement parameters describe
- 13.2 mathematical model
- 13.4 Uncertainty components Evaluation
- 13.6 Evaluation of expanded uncertainty
- 13.7 Expression of Uncertainty in Measurement results and
1 Scope
This standard specifies the chemical composition analysis Measurement Uncertainty universal norms and gravimetric method, titration, spectrophotometry, atomic
Absorption spectrometry, hydride generation - atomic fluorescence spectrometry, inductively coupled plasma atomic emission spectrometry, spark discharge atomic emission spectrometry , X-ray fluorescence spectrometry, infrared absorption and thermal conductivity method, the determination of carbon content Uncertainty evaluation method of measuring gas volumetric method.
This standard applies to the metallurgical analysis of chemical composition of Measurement Uncertainty.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12805 Laboratory glassware Burettes
GB/T 12806 Laboratory glassware single marking flask
GB/T 12807 Laboratory glassware indexing pipette
GB/T 12808 Laboratory glassware single marking pipette
JJF1059 Evaluation and Expression of Uncertainty in Measurement
3 General
3.1 Analysis of common test uncertainty factor
According to the chemical composition analysis of the characteristics of uncertainty factors that can be broadly summarized as follows.
a) is measured definitions, concepts and measurement conditions of incomplete or imperfect;
b) sampling and sample preparation, sample storage and uncertainty caused by the sample itself;
c) analytical balance test and measurement procedure used, weight, capacity vessels, micrometers, calipers and other measuring instruments inherent
Uncertainty caused by the error;
Changes introduced uncertainty d) measurement conditions;
e) certified reference material uncertainty value or purity standard substance;
f) measurement method, the measurement process brought about uncertainty;
g) changes its linear calibration curves, the measurement results of rounding introducing uncertainty;
h) the presence of an analog instrument readings human error;
i) digital instrument due to the introduction of the resolution of the indicating device indicates the deviation;
j) uncertainty constants, parameters, and other empirical coefficient references;
k) the measurement process of random factors and random factors and the interaction between the above factors, the performance under the same conditions,
Repeated measure changes in magnitude.
These factors generated uncertainty are not necessarily independent, it may be relevant. For example, item k may be the presence of a front
Correlation set. Under certain conditions, certain factors may be the main contributor to uncertainty, while others may contribute minimal, negligible.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 75 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28898-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28898-2012
$1,250.00