Valid

GB/T 28721-2012Cathodic protection of reinforcing steel in atmospherically exposed concrete structures (English PDF)

大气环境混凝土中钢筋的阴极保护

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28721-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2012

Implementation date

February 1, 2013

Scope

GB/T 28721-2012 is the English-translated version of 大气环境混凝土中钢筋的阴极保护.

GB/T 28721-2012 is the Chinese standard "Cathodic protection of reinforcing steel in atmospherically exposed concrete structures".

Its scope clause reads: This standard specifies the atmospheric environment of reinforced concrete cathodic protection of terms and definitions, general provisions, and to assess the state of the building or structure Maintenance, cathodic protection systems, the installation, commissioning, system records and documents, operation and maintenance.

This standard applies to cathodic protection of reinforced concrete atmosphere. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28721-2012

National Standard of the People's Republic of China

ICS
25.220.99
Classification
A 29

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General
  • 4.1 Design
  • 4.2 Quality Management
  • 4.3 2 persons
  • 5 building or structure status assessment and repair
  • 5.1 General provisions
  • 5.2 Profile
  • 5.3 Visual inspection and stratified survey
  • 5.4 Analysis of Chloride
  • 5.5 carbonation depth measurement
  • 5.6 Reinforced concrete protective layer thickness and position
  • 5.7 Reinforced electrical continuity
  • 5.8 steel/concrete potential
  • 5.9 concrete resistivity
  • 5.10 integrity requirements
  • 5.11 Cement-based cladding layer
  • 6 cathodic protection system
  • 6.1 System components
  • 6.2 Power supply
  • 6.4 anode
  • 6.5 monitoring sensor
  • 6.6 Monitoring Equipment
  • 6.7 Data Management System
  • 6.8 Cable
  • 8 6.9 Terminal box
  • 7 Setup
  • 9 7.1 electrical continuity
  • 7.2 Performance Monitoring System
  • 7.3 Reinforced concrete connection
  • 7.4 Compatibility with cathodic protection components related to concrete repair
  • 7.5 before treatment anode mounting surface
  • 7.6 Anode Installation
  • 7.7 anode connection
  • 7.8 implementation of anode coating, sealant or decorative surface coating
  • 7.9 Electrical installation
  • 7.10 installation test
  • 8 Commissioning
  • 8.1 Visual inspection
  • 10 8.3 Initial power
  • 8.4 for initial commissioning
  • 8.5 Initial Performance Evaluation
  • 8.6 Protection criteria
  • 8.7 Adjustment protection current
  • 9 system records and documents
  • 9.1 Quality and test records
  • 9.2 Installation and Commissioning Report
  • 9.3 Operation and Maintenance Manual
  • 10.1 cycles and program
  • 10.2 reviewed
  • 10.3 System Review Report
  • Appendix A (informative) design process
  • References

1 Scope

This standard specifies the atmospheric environment of reinforced concrete cathodic protection of terms and definitions, general provisions, and to assess the state of the building or structure

Maintenance, cathodic protection systems, the installation, commissioning, system records and documents, operation and maintenance.

This standard applies to cathodic protection of reinforced concrete atmosphere.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 4208 enclosure protection (IP code)

GB/T 10123 corrosion of metals and alloys - Basic terms and definitions

GB/T 12706 (all parts) Rated voltage 1kV (Um = 1.2kV) to 35kV (Um = 40.5kV) extruded insulation power electricity

Cable & Accessories

GB 19212.5 supply voltage is 1100V and below transformers, Part 5 Safety reactors, power supply units and similar products

Score. Particular requirements and tests and built-in isolation transformer isolation transformer power supply unit

GB/T 19285 buried steel pipeline corrosion protection engineering inspection

GB/T 50344 standard technical inspection of building structure

CB * 3220 Marine potentiostat technical conditions

JGJ/T23 Rebound Method Technical specification for testing concrete compressive strength

BSEN1504-9 for the protection and repair products and systems for concrete structures defined, requirements, quality control and conformity assessment section

General Provisions products and systems used (Productsandsystemsfortheprotectionandrepairofconcrete. 9 part structures-Definitions, requirements, qualitycontrolandevaluationofconformity-Part 9. General principlesfortheuseofproductsandsystems)

3 Terms and Definitions

GB/T 10123 as defined in the following terms and definitions apply to this document.

3.1 Regional zone

A part of the cathodic protection system.

3.2 Confluence drainpoint

Cathode cable connection points are reinforced to protect buildings or structures, protection current through this point back to the source.

3.3 Anode

Protection provided by an external power supply current electrode of a building or structure for cathodic protection of reinforced.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28721-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28721-2012

$315.00