GB/T 28636-2012Heating and air conditioning system hydraulic balance valve (English PDF)
采暖与空调系统水力平衡阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28636-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2012
Implementation date
February 1, 2013
Scope
GB/T 28636-2012 is the English-translated version of 采暖与空调系统水力平衡阀.
GB/T 28636-2012 is the Chinese standard "Heating and air conditioning system hydraulic balance valve".
Its scope clause reads: This standard specifies the heating and air conditioning systems hydraulic balancing valve (hereinafter referred to as balancing valve) terms and definitions, structure, classification, specifications, nominal Pressure type, materials, requirements, test methods, inspection rules and signs, instructions and certification, packaging, transportation and storage.
This standard applies to the central heating and air conditioning circulating water (or aqueous ethylene glycol) system, change the local circulation by manually adjusting the resistance Loop water system water balance balancing valve; its working pressure is less than 2.5MPa, nominal diameter of DN15 ~ DN400, working temperature -10 °C ~ 130 °C. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28636-2012
National Standard of the People's Republic of China
- ICS
- 91.140.01
- Classification
- P 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 structure, classification, specifications, nominal pressure and type
- 5 Material
- 6 Requirement
- 8 6 Inspection Rules
- 9 signs, instructions and certificates
- 10 packaging, transportation and storage
- Appendix A (normative) Heating and air conditioning system Hydraulic Valves Flow Characteristics Test Method
1 Scope
This standard specifies the heating and air conditioning systems hydraulic balancing valve (hereinafter referred to as balancing valve) terms and definitions, structure, classification, specifications, nominal
Pressure type, materials, requirements, test methods, inspection rules and signs, instructions and certification, packaging, transportation and storage.
This standard applies to the central heating and air conditioning circulating water (or aqueous ethylene glycol) system, change the local circulation by manually adjusting the resistance
Loop water system water balance balancing valve; its working pressure is less than 2.5MPa, nominal diameter of DN15 ~ DN400, working temperature
-10 °C ~ 130 °C.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1047 conduit element DN (nominal size) of the definition and selection
GB/T 1220 stainless steel rod
GB/T 1414 series common thread pipeline
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 9112 steel pipe flanges with type parameters
GB/T 9969 General Industrial Product Manual
GB/T 12220 Universal Valve logo
GB/T 12221 metal valve structure length
GB/T 12225 common valve copper alloy castings
GB/T 12226 common valve gray iron castings
GB/T 12227 common valve iron castings
GB/T 13808 copper and copper alloy extruded rod
GB/T 13927-2008 industrial valve pressure test
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Heating and air-conditioning system Hydraulic Valves
Central heating/air conditioning circulating water system, flow measurement instruments can be used to measure the flow through the valve, the valve blocking by manual adjustment
Force, so that the hydraulic system of hydraulic pipe network reaches equilibrium dedicated regulating valve.
3.2 Flow capacity
Heating and air conditioning systems under a hydraulic balance valve opening, the differential pressure across the valve is 0.1MPa, the fluid temperature is 5 °C ~ 40 °C, the
The volume of fluid flow passes.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28636-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28636-2012
$195.00