Valid

GB/T 28614-2012Green manufacturing - The general technique guideline for dry cutting (English PDF)

绿色制造 干式切削 通用技术指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28614-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

December 1, 2012

Scope

GB/T 28614-2012 is the English-translated version of 绿色制造 干式切削 通用技术指南.

GB/T 28614-2012 is the Chinese standard "Green manufacturing - The general technique guideline for dry cutting". Its scope clause reads: This standard specifies the general technical requirements General requirements for dry cutting and dry cutting machine tools, cutting tools, workpieces, the process parameters.

This standard applies to dry cutting machinery products, auxiliary dry cutting (including air-cooled, liquid nitrogen cooling, laser and other auxiliary dry cutting) process.

Its clauses include terms and definitions; general requirements for dry cutting.

Found what you need?

Document preview — GB/T 28614-2012

National Standard of the People's Republic of China

ICS
25.010
Classification
J 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements for dry cutting

1 Scope

This standard specifies the general technical requirements General requirements for dry cutting and dry cutting machine tools, cutting tools, workpieces, the process parameters.

This standard applies to dry cutting machinery products, auxiliary dry cutting (including air-cooled, liquid nitrogen cooling, laser and other auxiliary dry cutting) process.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 15760 metal cutting machine tool safety general technology condition

GB/T 16461 single point turning tool life test

GB/T 16769 Metal Cutting Machine noise level measurement method

GB/T 23573 metal cutting machine dust concentration measurement method

GB/T 28612-2012 Mechanical Products Green Manufacturing terms

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Green Manufacturing

Sustainable development model of modern manufacturing, and its goal is to make the product throughout its life cycle, consumes very little resources, ecological environment

Minimal negative impact on human health and safety hazards is extremely small, and, ultimately, sustained and coordinated economic and social benefits of optimization.

[GB/T 28612-2012, Definition 2.1]

3.2 Dry Cutting

A process does not use any cutting fluid in the cutting process.

4 General requirements for dry cutting

4.1

In the dry cutting process, possibly resulting in personal injury or damage to equipment, security measures should be taken to prevent the chips of the workpiece,

Tool fly.

4.2

dry cutting workplace total dust concentration should not exceed 3mg/m3, measured dust concentrations should be consistent with GB/T 23573 related

Provisions.

4.3

cryogenic cooling or heat-assisted take dry cutting should take protective measures to prevent the direct contact with the body is too hot or too cold medium.

4.4

Dry-cutting machine tools under idling conditions, the machine's noise level should not exceed 85dB (A), noise measurement method should comply

GB/T 16769 requirements.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28614-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28614-2012

$125.00