Valid

GB/T 28613-2012Guideline for green manufacturing process planning of mechanical products (English PDF)

机械产品绿色制造工艺规划 导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28613-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

December 1, 2012

Scope

GB/T 28613-2012 is the English-translated version of 机械产品绿色制造工艺规划 导则.

GB/T 28613-2012 is the Chinese standard "Guideline for green manufacturing process planning of mechanical products". Its scope clause reads: This standard specifies the overall goal of machinery green manufacturing process planning, basic principles, general framework, main content, procedures and Evaluation of green technology and so on.

This standard applies to machinery manufacturing enterprises of new products and old technology transformation process planning for the development of green manufacturing process planning machinery mention For guidance. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28613-2012

National Standard of the People's Republic of China

ICS
25.010
Classification
J 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Green Manufacturing
  • 3.2 Green Technology of technologicalgreenefficiency
  • 3.3 Green manufacturing process planning
  • 3.4 Optimization of process parameters

1 Scope

This standard specifies the overall goal of machinery green manufacturing process planning, basic principles, general framework, main content, procedures and

Evaluation of green technology and so on.

This standard applies to machinery manufacturing enterprises of new products and old technology transformation process planning for the development of green manufacturing process planning machinery mention

For guidance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 28612-2012 Mechanical Products Green Manufacturing terms

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Green Manufacturing

Sustainable development model of modern manufacturing, and its goal is to make the product throughout its life cycle, consumes very little resources, ecological environment

Minimal negative impact on human health and safety hazards is extremely small, and, ultimately, sustained and coordinated economic and social benefits of optimization.

[GB/T 28612-2012 2.1 Definition]

3.2 Green Technology of technologicalgreenefficiency

In mechanical products to meet the performance requirements of the premise, the consumption of resources and manufacturing process for process, impact on ecological environment, human health and

Safety hazards attributes.

3.3 Green manufacturing process planning

Of raw materials, semi-finished products into a process for product, process and related factors and aspects of the overall planning and design to change

The good of their green technology the whole process, making the manufacturing process planning approach to coordinate economic and social benefits of optimization.

Note. This standard meaning of "process planning" in a broad sense, the work covers enterprise technology development planning, new product review process, the process provided the overall program

Design, process design and process reform at all stages of old.

3.4 Optimization of process parameters

For the selected manufacturing process technology, process parameters involved in machining parts (such as cutting speed, feed rate, depth of cut, knife

A deflection angle, cutting mode, and other controllable parameter) are optimized to reduce energy consumption, extend tool life and improve processing

Quality and technology of green.

4 The overall objective of

Green manufacturing process planning objective is to meet the product quality, production costs, production efficiency based on minimizing resource consumption, […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28613-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28613-2012

$125.00