GB/T 28500-2012Technical requirements of 900/1800MHz TDMA digital cellular mobile network signaling system NO.7 ISUP (English PDF)
900/1800MHz TDMA 数字蜂窝移动通信网No.7 ISUP信令技术要求
This is a limited preview
Buy now to download the full PDF (96 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28500-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
October 1, 2012
Scope
GB/T 28500-2012 is the English-translated version of 900/1800MHz TDMA 数字蜂窝移动通信网No.7 ISUP信令技术要求.
GB/T 28500-2012 is the Chinese standard "Technical requirements of 900/1800MHz TDMA digital cellular mobile network signaling system NO.7 ISUP".
Its scope clause reads: This standard specifies the protocol ISUP message parameters are applied in 900/1800MHzTDMA digital cellular mobile communications network when the Format and encoding, ISUP call flow, ISUP supplementary service call process, as well as the same way with the other signaling signaling processes.
This standard applies to 900/1800MHzTDMA digital cellular mobile communication systems support No.7 common channel signaling system Fully Services Digital Network User Part (ISUP) devices. Its clauses include abbreviations.
Found what you need?
Document preview — GB/T 28500-2012
National Standard of the People's Republic of China
- ICS
- 33.040.30
- Classification
- M 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 4.1 signaling message
- 4.2 signaling information
- 5 formats and coding
- 5.1 Overview
- 5.2 format and encoding parameters
- 5.3 ISUP parameters
- 5.4 ISUP message formats and coding
- 6 signaling procedures (basic call control)
- 6.1 Successful call set-up
- 6.2 Unsuccessful call set-up
- 6.3 Normal release procedures
- 6.4 pause, resume
- 6.6 Echo control program
- 6.7 Network performance
- 6.8 irregularities
- 6.9 ISDN User Part signaling congestion control
- 6.10 Automatic Congestion Control
- 6.11 ISDN User Part availability control
- 7 ISUP supplementary services supported
- 7.1 Overview
- 7.2 Calling Line Identification Presentation (CLIP, CalingLineIdentificationPresentation)
- 7.3 Calling Line Identification Restriction (CLIR, CalingLineIdentificationRestriction)
- 7.4 is supplied wiring identification (COLP, ConnectedLineIdentificationPresentation)
- 7.5 Connected Line Identification Restriction (COLR, ConnectedLineIdentificationRestriction)
- 7.6 Call Forwarding Unconditional (CFU, TheCalForwardingUnconditional)
- 7.9 The user can not move and call forwarding (CalForwardingforMobilesubscriberUnreachable)
- 7.10 Call Waiting (CW, Cal Waiting)
- 7.11 Call Hold (HOLD, CalHold)
- 7.12 tripartite business (3PTY, ThreeParty)
- 8 signaling with
- 8.1 PLMN signaling complex processes within the network (MISUP-MTUP)
- 8.2 M-ISUP signaling complex process with PSTNISUP
- 8.3 M-ISUP signaling complex process with PSTNTUP
- Appendix A (normative appendix) ISUP protocol timer value
- Appendix B (normative) in order to support business intelligence, increase in GSMISUP parameters
- References
1 Scope
This standard specifies the protocol ISUP message parameters are applied in 900/1800MHzTDMA digital cellular mobile communications network when the
Format and encoding, ISUP call flow, ISUP supplementary service call process, as well as the same way with the other signaling signaling processes.
This standard applies to 900/1800MHzTDMA digital cellular mobile communication systems support No.7 common channel signaling system Fully
Services Digital Network User Part (ISUP) devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GF001-9001 Chinese domestic telephone network No.7 signaling specifications
YDN038-1997 domestic No.7 signaling specification Integrated Services Digital Network User Part (ISUP)
YD/T910.3900/1800MHz TDMA digital cellular mobile communication network mobile services switching center and a base station subsystem indirect
Opening the second phase of the technical specifications
DSS1 business instruction code YD/T913 Digital Subscriber Signalling System No. 1 (DSS1) for ISDN telecommunications services
ITU-TQ.118 anomalies special release arrangements (Abnormalconditions-Specialreleasearrangements)
ITU-TQ.703 No.7 signaling system switching and signaling specification Message Transfer Part (MTP) signaling link (Switchingand signalingspecificationsofsignalingsystemNo.7-Messagetransferpart (MTP) signalinglink)
ITU-TQ.704 No.7 signaling system switching and signaling specification Message Transfer Part signaling network functions and messages (Switching andsignalingspecificationsofSignalingSystemNo.7-Messagetransferpart (MTP) Signalingnet- workfunctionsandmessages)
ITU-TQ.730 ISDN User Part supplementary services (ISDNUserPartsupplementaryservices)
ITU-TQ.761 No.7 ISDN User Part signaling system functional description (SignalingSystemNo.7-ISDNUser
Partfunctionaldescription)
ITU-TQ.763 No.7 signaling system ISDN user part formats and encoding (SignalingSystem No.7-ISDN UserPartformatsandcodes)
ITU-TQ.764 No.7 signaling system ISDN User Part signaling procedures (SignalingSystemNo.7-ISDNUser
Partsignalingprocedures)
ITU-TQ.850 No.1 Digital Subscriber Signalling System (DSS1) and Signalling System No.7 ISDN User Part (ISUP) the reason
And location of use (UsageofcauseandlocationintheDigitalSubscriberSignalingSystemNo.1andthe
SignalingSystemNo.7ISDNuserpart)
3 Abbreviations
CCSS CommonChannelSignalingSystem common channel signaling system […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 96 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28500-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28500-2012
$1,640.00